Bose Lifestyle 5.1 Manual

The Bose Lifestyle 5.1 is a premium home theater system featuring a media center, five cube speakers, an Acoustimass module, universal remote control, AM/FM tuner, and support for multiple audio/video sources. It delivers immersive 5.1-channel surround sound with proprietary Bose technologies for room adaptation and audio calibration. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. System Calibration 8. Remote Control Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Lifestyle media center, five cube speakers, Acoustimass bass module, universal remote control, AM/FM antenna, and various input/output connections.

Feature	Description
Media Center	Central control unit with amplifier, tuner, and source inputs
Cube Speakers	Five small speakers for front, center, and surround channels
Acoustimass Module	Handles low-frequency effects (bass)
Universal Remote	Controls system and connected components
AM/FM Tuner	Built-in radio with preset memory
Audio Inputs	Optical, coaxial, analog RCA for various sources
Video Inputs	Composite and S-Video for video sources
ADAPTiQ Audio Calibration	Room-specific sound optimization
System Power	Turns entire system on/off
Volume Control	Master volume adjustment

Installation

Unpack and inspect all components. Plan speaker placement for optimal surround sound.

Position Media Center: Place near TV and other source components with adequate ventilation.
Connect Speakers: Use color-coded cables to connect cube speakers to media center terminals.
Place Acoustimass Module: Position along a wall or in a corner for best bass response.
Connect Sources: Attach DVD player, cable box, etc., to appropriate audio/video inputs.
Connect to TV: Use audio output from TV to media center input.
Plug into AC power.

WARNING! Ensure all connections are secure and cables are not pinched. Use proper speaker stands or mounts.

First-Time Setup

Power on system; follow on-screen prompts if connected to a video display.

Initial Power: Press SYSTEM POWER on remote or media center.
ADAPTiQ Calibration: Run ADAPTiQ setup using included headset for room-optimized sound.
Source Setup: Assign inputs (e.g., DVD, CABLE) to specific buttons on remote.
Radio Presets: Tune to desired AM/FM stations and save as presets.
Volume Preferences: Set initial volume level and night mode if desired.

CAUTION! Do not block ventilation openings on media center or bass module.

Specifications

System Type: 5.1-channel home theater.
Total Power: Varies by model (check product label).
Speaker Drivers: Proprietary Bose cube speakers and bass module.
Inputs: Optical digital, coaxial digital, analog stereo, composite video.
Outputs: Speaker terminals, subwoofer output, video monitor output.
Tuner: AM/FM with 30 station presets.
Remote: Universal learning remote with backlight.
Power Source: 120V AC, 60Hz.
Dimensions: Media center and speakers vary; refer to packaging.

Controls and Settings

Access menu system via remote or front panel. Front Panel: SYSTEM POWER, SOURCE SELECT, VOLUME, MENU.

Remote: SYSTEM POWER, Numeric buttons, SOURCE SELECT, VOLUME, MUTE, MENU, ADAPTiQ, SETUP, arrow keys, ENTER.

Audio Settings: Bass, Treble, Balance, Night Mode (compresses dynamic range). Video Settings: Pass-through settings for connected sources. Tuner: Manual/Auto tuning, preset memory. System: ADAPTiQ calibration, remote setup, factory reset.

Connecting Devices

Audio Sources: Use optical/coaxial for best quality (DVD, Blu-ray, game consoles). Video Sources: Composite or S-Video to media center, then output to TV.

Turn off all components before connecting.
Use high-quality cables for digital connections.
Assign source names in setup menu (e.g., "DVD", "CABLE").
Select source via remote SOURCE buttons.

Tip: For optimal performance, use optical digital connection for Dolby Digital/DTS sources.

System Calibration

ADAPTiQ audio calibration tailors sound to your room.

Place ADAPTiQ headset in primary listening position.
Press ADAPTiQ on remote; follow on-screen prompts.
Move headset to other listening positions when prompted.
System analyzes room acoustics and adjusts speaker output.
Save calibration when complete.

Note: Re-run ADAPTiQ if you rearrange furniture or move speakers.

Remote Control Functions

Universal remote can control TV, cable box, DVD player, etc.

Programming: Use auto-search or code entry to program devices.
Source Control: Remote switches system source and corresponding device.
Macro Functions: Program sequences (e.g., "Watch DVD" turns on system, TV, DVD player).
Volume Control: Can control system volume or TV volume (if programmed).

WARNING! Keep remote away from moisture; replace batteries when weak.

Care & Cleaning

Unplug system before cleaning. Use soft, dry cloth for media center and speakers. Do not use liquids or abrasive cleaners.

CAUTION! Do not open any components; no user-serviceable parts inside.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Bose Corporation; all rights reserved. For support, visit www.bose.com or contact Bose Customer Service at 1-800-999-2673.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No sound from speakers	Connections/power	Check speaker wire connections; ensure system is on; verify source selection.
Remote not working	Batteries/obstructions	Replace batteries; ensure clear path to media center IR sensor.
No bass from Acoustimass module	Cable/placement	Check module cable connection; ensure module is powered; adjust placement.
Distorted sound	Source/volume	Check source device; reduce volume level; ensure proper audio cables.
System won't turn on	Power cord/outlet	Verify power cord is secure; test outlet with another device.

Reset: Unplug media center for 1 minute, then reconnect.

Service: 1-800-999-2673; www.bose.com