The Bose L1 Model 2 is a portable line array loudspeaker system designed for musicians, DJs, and presenters. It features a modular design with a power stand, bass module, and array speakers, providing wide, even coverage with minimal setup. Key features include ToneMatch audio processing, multiple input channels, built-in effects, and remote control capability. Below are key sections for safety, features, setup, operation, and troubleshooting.
Key components: Power Stand (amplifier/mixer), Bass Module, Array Speakers (multiple sections), Remote Control, Carrying Bags.
| Feature | Description |
|---|---|
| Power Stand | Integrated amplifier and mixer with ToneMatch processing |
| Bass Module | Handles low-frequency reproduction |
| Array Speakers | Line array design for wide, even sound dispersion |
| ToneMatch Presets | Optimized settings for various instruments and microphones |
| Channel Inputs | Multiple XLR/TRS combo inputs with individual controls |
| Built-in Effects | Reverb and chorus effects per channel |
| Remote Control | Wireless remote for volume and mute adjustments |
| Modular Design | Easy assembly and transport |
| Power Input | Universal voltage (100-240V AC) |
| Carrying Bags | Included for transport and protection |
Unpack all components and inspect for damage. Assemble on a stable, level surface.
WARNING! System is heavy; use proper lifting technique. Ensure all connections are secure before powering on.
Power on the system; all channel LEDs should illuminate briefly.
CAUTION! Start with all volume controls at minimum to prevent loud pops or feedback.
Front Panel: Channel Gain knobs, ToneMatch buttons, Effect knobs, Master Volume. Rear Panel: Power switch, AC input, Bass Module output, Remote receiver.
Remote Control: POWER, MUTE, Master Volume up/down, Channel select buttons.
Channel Controls: GAIN (adjust input sensitivity), ToneMatch (select preset), EFFECT (adjust reverb/chorus level), PAN (stereo positioning). Master Section: MASTER VOLUME, SYSTEM MUTE. Setup: Remote pairing, factory reset.
Connect microphones, instruments, or line-level devices to channel inputs.
Tip: Use the ToneMatch preset that matches your source for optimal sound quality.
ToneMatch presets optimize EQ, compression, and other parameters for specific sound sources.
WARNING! Do not connect phantom-powered microphones to instrument inputs.
The remote allows wireless control of master volume and mute from up to 50 feet away.
Pairing: Hold SET button on remote for 5 seconds until LED flashes, then press PAIR on power stand rear panel. Volume Control: Use up/down buttons to adjust master volume. Mute: Press MUTE to toggle system mute on/off.
Unplug from power before cleaning. Wipe exterior with a dry, soft cloth. Store in a dry, temperate environment.
CAUTION! Do not use liquids or aerosols. Do not expose to extreme temperatures or moisture.
FCC Part 15: Class B digital device; complies with interference limits. ICES-003: Complies with Canadian EMI regulations. Copyright © 2025 Bose Corporation. All trademarks are property of Bose Corporation. For support, visit www.bose.com/support or contact 1-800-999-2673.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| No sound from system | Power/Mute/Connections | Ensure power is on; check mute status; verify all cables are connected securely. |
| Distorted sound | Input gain too high | Reduce channel gain until clipping LED stops lighting. |
| Feedback or howling | Microphone placement | Move microphone away from speakers; reduce channel gain or master volume. |
| Remote not working | Batteries/Pairing | Replace remote batteries; re-pair remote to system. |
| One channel not working | Cable/Input jack | Try a different cable; test source on another channel. |
| System won't power on | Power cable/Outlet | Check power cable connection; try a different AC outlet. |
Reset: To restore factory settings, power off, then hold ToneMatch buttons 1 and 3 while powering on.
Service: 1-800-999-2673; www.bose.com/support