Bose GS Series 2 Manual

The Bose GS Series 2 is a premium multimedia speaker system designed for high-fidelity audio reproduction. It features advanced acoustic technologies, multiple input options, a remote control, and user-adjustable settings for bass, treble, and balance. Powered by standard AC power, it is compatible with various audio sources including TVs, computers, and mobile devices. Below are key sections for safety, features, setup, operation, and troubleshooting.

Features at a Glance

Key components: Main speaker unit with built-in amplifier, Remote Control, AC power cord, Stereo RCA audio cables, Optical digital audio cable.

Installation & Placement

Unpack all components and inspect for damage. Choose a stable, level surface.

1. Placement: For optimal sound, place at ear level in your primary listening position. Allow at least 2 inches of clearance around vents.
2. Wall Mounting (optional): Use provided template to mark screw positions. Secure mounting hardware to wall, then hang speaker via keyhole slots.
3. Connect Power: Plug AC power cord into unit and then into a grounded wall outlet.

WARNING! Do not place near heat sources or in direct sunlight. Ensure ventilation openings are not blocked.

First-Time Setup

Connect power and follow these steps to initialize your system.

1. Power On: Press POWER button on unit or remote. Indicator light will illuminate.
2. Select Input: Press INPUT button to cycle to your desired source (e.g., OPT, AUX).
3. Connect Source: Use appropriate cable to connect your TV, computer, or player to the corresponding input on the speaker.
4. Adjust Settings: Use remote to set initial bass, treble, and balance to your preference.

CAUTION! Use only the included power adapter. Using an incorrect adapter may cause damage.

Specifications

• System Type: 2.0 channel powered multimedia speaker system.
• Total Power Output: 120 Watts RMS.
• Frequency Response: 45 Hz – 20 kHz.
• Inputs: Optical (Toslink), Coaxial, Stereo RCA, 3.5mm Auxiliary.
• Outputs: None (self-powered system).
• Remote Control: Infrared, requires 2 x AAA batteries (included).
• Power Supply: 100-240V AC, 50/60Hz auto-switching.
• Dimensions (Main Unit): 18.5" W x 6.5" H x 8.25" D.
• Weight: 12.1 lbs (5.5 kg).

Controls and Connections

Front Panel: POWER button, Status LED, Infrared sensor. Rear Panel: All input connectors, AC power input.

Remote: POWER, INPUT SELECT, VOLUME UP/DOWN, MUTE, BASS +/- , TREBLE +/- , BALANCE L/R.

Audio Settings: Adjust BASS and TREBLE in +/- 10 dB range. BALANCE shifts emphasis between left and right channels. Input Selection: Cycle through OPT (optical), COAX (coaxial), AUX (analog), and PC (if applicable). Status LED: Solid green = On; Flashing green = Muted; Amber = Standby.

Connecting Audio Sources

TV (Digital): Use included optical cable from TV's DIGITAL AUDIO OUT to speaker's OPT input. Computer: Use 3.5mm to RCA cable from computer's headphone/line-out to speaker's AUX input. CD/DVD Player: Use RCA cables from player's AUDIO OUT to speaker's AUX RCA inputs.

1. Ensure speaker and source device are powered OFF before making connections.
2. Use high-quality cables for best performance.
3. Power on speaker, then select the corresponding input using the INPUT button.
4. Power on your source device and begin playback.

Tip: For digital connections, ensure your source device's audio output is set to PCM, not Bitstream, for compatibility.

Remote Control Operation

Remote requires line-of-sight to the front panel IR sensor.

1. Power: Turns system on or puts it into standby.
2. Input: Press repeatedly to cycle through OPT > COAX > AUX > PC.
3. Volume: Adjusts master volume level. Hold button for rapid change.
4. Mute: Press once to mute audio (LED flashes). Press again or adjust volume to unmute.
5. Tone Controls: Press BASS or TREBLE, then use +/- to adjust. Settings are memorized.
6. Balance: Press BALANCE, then use L or R to shift soundstage.

WARNING! Do not mix old and new batteries. Remove batteries if remote will not be used for an extended period.

Audio Settings & Modes

No special sound modes (e.g., Movie, Music) are present. Audio character is adjusted solely via Bass, Treble, and Balance controls. For dialogue clarity, a slight reduction in bass and a slight increase in treble may help. For music, a flat setting or a "V" shape (boosted bass and treble) is often preferred.

Care & Maintenance

Unplug from power before cleaning. Use a soft, dry cloth to wipe the exterior. For stubborn marks, lightly dampen cloth with water only. Do not use solvents or abrasive cleaners.

CAUTION! Never allow liquid to enter the vents or openings. Do not use compressed air to clean dust from vents, as it may drive debris inward.

Regulatory & Compliance

FCC Part 15: Class B digital device. Complies with Canadian ICES-003. This product conforms to all applicable EU directive requirements. The crossed-out wheeled bin symbol indicates separate collection for electrical and electronic equipment. For detailed disposal and recycling information, visit www.bose.com/compliance. Bose and the Bose logo are registered trademarks of Bose Corporation. For support in the US and Canada, visit www.bose.com/support or call 1-800-999-2673.

Troubleshooting

Reset: Unplug power cord for 60 seconds, then reconnect to reset the system to factory defaults (audio settings may be lost).

Service: 1-800-999-2673; www.bose.com/support