Bose Docking Station Series 1 Manual

The Bose Docking Station Series 1 is a premium audio docking solution designed for iPod and iPhone models, featuring high-quality Bose sound reproduction, a built-in amplifier, and a convenient charging dock. It includes a remote control, auxiliary input for other audio sources, and various sound adjustment settings. Powered by AC adapter. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Playing Audio 8. Remote Control Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Docking station with integrated amplifier, Remote Control, Auxiliary input jack, Power connector, iPod/iPhone dock connector.

Feature	Description
iPod/iPhone dock	For connecting and charging compatible Apple devices
Auxiliary input jack	For connecting other audio sources (e.g., MP3 players)
Power connector	For AC adapter connection
Remote control sensor	Receives signals from included remote
Volume control knob	Manual adjustment of audio output level
Power indicator LED	Shows power status (on/standby)
Bose sound system	Integrated speakers and amplifier for premium audio
Charging function	Charges docked iPod/iPhone while playing
Remote control	Controls playback, volume, and source selection
Protective cover	Optional cover for dock connector when not in use

Installation

Unpack and inspect contents. Place on stable, level surface.

Connect power: Plug AC adapter into power connector on dock, then into wall outlet.
Insert dock adapter: Select appropriate dock adapter for your iPod/iPhone model and insert into dock connector.
Connect auxiliary source (optional): Use 3.5mm audio cable to connect other devices to AUX input.
Power on: Press power button or connect device to activate.

WARNING! Use only Bose-approved AC adapter. Ensure proper ventilation around unit.

First-Time Setup

Power on docking station; follow these steps.

Select source: Use SOURCE button on remote or dock to choose between iPod or AUX input.
Dock your device: Gently insert iPod/iPhone into dock connector until it clicks into place.
Adjust volume: Start with low volume using knob or remote, then increase to desired level.
Configure sound settings: Use remote to access tone controls if available.

CAUTION! Handle docked devices carefully; do not force into connector.

Specifications

Compatible Devices: iPod models (with dock connector), iPhone models.
Audio System: Bose proprietary speaker system and amplifier.
Inputs: iPod dock connector, 3.5mm auxiliary input.
Output Power: Integrated amplifier (specific wattage per model).
Remote Control: Infrared, controls playback, volume, source.
Charging: Charges docked iPod/iPhone automatically.
Power Source: AC adapter (included), input: 120V AC, 60Hz.
Dimensions: Varies by model; compact design.
Weight: Lightweight for portability.

Controls and Settings

Front Panel: POWER button, Volume knob, Source indicator. Remote: POWER, PLAY/PAUSE, PREV/NEXT, VOLUME UP/DOWN, MUTE, SOURCE.

Basic Operations: Power on/off with POWER button. Select source (iPod/AUX) with SOURCE button. Adjust volume with knob or remote. Control playback (play, pause, skip) via remote or device itself when docked.

Sound Settings: Some models offer basic tone adjustment via remote sequence (check manual). Default sound profile optimized for Bose quality.

Connecting Devices

iPod/iPhone: Use dock connector with appropriate adapter. AUX: 3.5mm audio cable from device to AUX input.

Turn off docking station before connecting/disconnecting devices.
Ensure correct dock adapter is installed for your device model.
For AUX input, set source to AUX on dock or remote.
For best audio quality, use high-quality audio cables for AUX connection.

Tip: Keep dock connector clean; use protective cover when not in use.

Playing Audio

Supports audio playback from docked iPod/iPhone or AUX input.

Dock device: Insert iPod/iPhone into dock; it should begin charging automatically.
Select source: Press SOURCE to choose iPod or AUX.
Control playback: Use remote or device controls to play, pause, skip tracks.
Adjust volume: Use volume knob on dock or remote.
Mute: Press MUTE on remote to temporarily silence audio.
Playback modes: Use device to select shuffle, repeat, or playlist modes.

WARNING! Do not remove device while it is actively playing/charging without pausing first to avoid audio pops.

Remote Control Functions

Remote controls power, volume, playback, and source selection. Point remote at front sensor. Replace batteries (typically AAA) when range decreases.

Button	Function
POWER	Turns docking station on/off
VOL +/-	Increases/decreases volume
MUTE	Toggles mute on/off
PLAY/PAUSE	Starts/pauses playback
PREV/NEXT	Skips to previous/next track
SOURCE	Cycles between iPod and AUX input

Care & Cleaning

Unplug power before cleaning. Use soft, dry cloth for exterior. For dock connector, use compressed air to remove dust.

CAUTION! Do not use liquids, solvents, or abrasive cleaners. Avoid getting moisture into openings.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Bose Corporation. For support, visit www.bose.com or contact Bose Customer Service. This product incorporates copyright protection technology.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power connection	Ensure AC adapter is plugged into dock and wall outlet; check power indicator.
No sound	Volume/mute/source	Increase volume; check mute; ensure correct source selected; verify device is playing.
Device not charging	Dock connection/adapter	Re-seat device in dock; ensure correct dock adapter is used; check device battery health.
Remote not working	Batteries/obstructions	Replace remote batteries; ensure clear line of sight to sensor; move closer.
Poor audio quality	Connections/source	Check all connections; try different audio source; ensure device volume is adequate.
iPod not recognized	Compatibility/reseat	Verify device compatibility; remove and re-dock device; restart device.

Reset: Unplug power for 60 seconds, then reconnect.

Service: Contact Bose Customer Support; www.bose.com