bose companion 5 manuale

The Bose Companion 5 multimedia speaker system delivers premium audio for computers and other multimedia devices. It features a control pod for easy volume and source adjustments, TrueSpace® digital processing circuitry for immersive sound, two desktop satellite speakers, and an Acoustimass® module for powerful bass. Below are key sections for safety, features, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operation 8. Care & Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Control Pod, Two Satellite Speakers, Acoustimass Module, Power Supply, Connection Cables.

Feature	Description
Control Pod	For volume control, mute, headphone jack, and source selection
Satellite Speakers	Two desktop speakers for left/right channels
Acoustimass Module	Produces deep, powerful low frequencies
TrueSpace® Circuitry	Creates an immersive, room-filling sound experience
Headphone Jack	For private listening on the control pod
USB Connection	For digital audio connection to a computer
Analog Input	3.5mm stereo input for other audio sources
Volume Control	Rotary knob on the control pod
Mute Button	Instantly mutes/unmutes audio
Power Supply	External AC adapter for system power

Installation

Unpack and inspect all contents. Place components on a stable surface.

Position Speakers: Place satellite speakers on your desk, left and right of your monitor.
Place Acoustimass Module: Position the module on the floor near your desk or under it.
Connect Control Pod: Place the pod within easy reach on your desk.
Connect Power: Plug the AC adapter into the Acoustimass module and then into a wall outlet.

WARNING! Ensure the power outlet is easily accessible. Do not place the Acoustimass module in an enclosed cabinet.

First-Time Setup

Connect the system to your computer and power it on.

Connect to Computer: Use the provided USB cable to connect the control pod to your computer's USB port.
Connect Satellite Speakers: Plug the speaker cables from the satellites into the ports on the Acoustimass module.
Connect Control Pod: Attach the control pod cable to the port on the Acoustimass module.
Power On: The system will power on automatically when connected to AC power and USB.

CAUTION! Connect all cables firmly before plugging in the power adapter.

Specifications

System Type: 2.1 Multimedia Speaker System.
Total Power: Not specified by Bose (proprietary amplification).
Inputs: USB (digital), 3.5mm analog stereo input.
Outputs: Headphone jack (3.5mm) on control pod.
Controls: Volume/Mute on control pod.
Technology: TrueSpace® digital signal processing, Acoustimass® bass module.
Power Source: External AC adapter (varies by region).
Compatibility: Windows and Mac computers, and other devices with USB or analog output.

Controls and Settings

All primary controls are located on the Control Pod.

Control Pod: Volume Knob (rotate to adjust), Mute Button (press to mute/unmute), Headphone Jack, Source Indicator (LED for USB/Analog).

Operation: Rotate the volume knob clockwise to increase volume, counterclockwise to decrease. Press the mute button once to silence audio; press again to restore. Plug headphones into the jack to automatically mute the speakers. The system automatically selects the active input source (USB or Analog).

Connecting Devices

Primary connection is via USB for digital audio. An analog input is available for other sources.

USB Connection (Recommended): For best audio quality from a computer.
Analog Connection: Use a 3.5mm stereo cable to connect devices like smartphones, tablets, or MP3 players to the analog input on the Acoustimass module.
Headphones: Plug into the 3.5mm jack on the control pod for private listening.

Tip: The system will automatically play audio from the last active source. Only one source can be active at a time.

Operation

The system is designed for simple, automatic operation.

Power: The system turns on automatically when a valid audio signal is detected via USB or Analog input.
Volume Adjustment: Use the knob on the control pod. Adjust your computer's system volume as a master level.
Mute: Press the mute button on the control pod. The LED may flash or change color to indicate mute status.
Source Selection: The system automatically switches to the source (USB or Analog) that is actively sending an audio signal.
Headphone Use: Plugging in headphones mutes the satellite speakers and Acoustimass module automatically.

WARNING! Avoid setting the volume to maximum for extended periods to prevent hearing damage and potential speaker damage.

Care & Cleaning

Unplug the system from power before cleaning. Use a soft, dry cloth to wipe the exterior surfaces of the speakers and control pod.

CAUTION! Do not use liquids, sprays, or abrasive cleaners. Do not allow moisture to enter any openings. Keep the Acoustimass module away from direct sources of heat or moisture.

Regulatory Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Copyright and trademarks are property of Bose Corporation. For the latest warranty information and support, visit www.bose.com or contact Bose customer service in your region.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No sound from speakers	Power/Volume/Mute	Ensure AC power is connected; check volume level on pod and computer; ensure system is not muted.
Sound from only one satellite	Connection/Balance	Check cable connections at the Acoustimass module and satellite. Verify stereo balance on your computer is centered.
No bass from Acoustimass module	Connection/Power	Ensure the module is plugged into power and the cable from the control pod is securely connected.
USB not recognized	Cable/Port	Try a different USB port on your computer. Ensure the USB cable is firmly connected at both ends.
Headphones not working	Jack/Connection	Ensure headphones are fully plugged into the control pod jack. Try a different pair of headphones.

Reset: Unplug the AC power adapter and USB cable for 30 seconds, then reconnect.

Service: For product support, visit www.bose.com or contact your local Bose authorized dealer.