Bose Companion 1 Manual

The Bose Companion 1 is a compact multimedia speaker system designed for personal computers, offering high-quality audio with a simple setup. It features a single speaker unit with an integrated amplifier, volume control, headphone jack, and auxiliary input. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Audio Playback 8. Care & Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Single speaker unit, Volume control knob, Headphone jack, Auxiliary input, Power adapter.

FeatureDescription
Speaker UnitCompact design with integrated amplifier
Volume Control KnobAdjusts audio output level
Headphone JackFor private listening
Auxiliary Input3.5mm jack for connecting external audio sources
Power AdapterProvides power to the speaker system
LED IndicatorShows power status

Installation

Unpack and inspect contents. Place on stable surface near computer.

  1. Connect to power: Plug power adapter into speaker and wall outlet.
  2. Connect to computer: Use included audio cable to connect speaker to computer's audio output.
  3. Connect auxiliary devices: Use 3.5mm cable to connect to smartphones, tablets, or other audio sources.
  4. Position speaker: Place within easy reach for volume adjustments.

WARNING! Ensure power adapter is properly connected to avoid electrical hazards. Keep away from liquids.

First-Time Setup

Power on speaker; adjust settings as needed.

  1. Power connection: Plug power adapter into outlet; LED should illuminate.
  2. Audio connection: Connect speaker to computer's audio output port.
  3. Volume adjustment: Turn volume knob to minimum before powering on; gradually increase to desired level.
  4. Test audio: Play sound from computer to verify connection.

CAUTION! Do not place speaker near heat sources or in direct sunlight.

Specifications

Controls and Settings

Volume Control: Rotate knob clockwise to increase volume, counterclockwise to decrease.

Connections: Audio input for computer, auxiliary input for external devices, headphone jack for private listening.

LED Indicator: Illuminates when power is connected. No additional software or drivers required for basic operation.

Connecting Devices

Computer: Use included audio cable to connect to computer's audio output. Auxiliary: Use 3.5mm cable to connect to smartphones, tablets, MP3 players.

  1. Turn off speaker and device before connecting.
  2. Match cable ends to correct ports (audio output to speaker input).
  3. Ensure connections are secure to avoid audio dropouts.

Tip: For best audio quality, ensure computer's audio settings are configured for external speakers.

Audio Playback

Supports audio from computers and external devices.

  1. Power on: Connect power; LED illuminates.
  2. Select source: Ensure correct audio source is selected on connected device.
  3. Adjust volume: Use volume knob to set desired level.
  4. Headphone use: Plug headphones into jack for private listening; speaker audio will mute automatically.
  5. Auxiliary playback: Connect external device to auxiliary input for alternative audio sources.

WARNING! Avoid high volume levels for extended periods to prevent hearing damage.

Care & Cleaning

Unplug before cleaning. Use dry, soft cloth only; do not use liquids or abrasive cleaners.

CAUTION! Do not spray liquids directly on speaker; keep away from moisture and dust.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Bose Corporation; trademarks of Bose Corporation. For support, visit www.bose.com or contact customer service.

Troubleshooting

SymptomPossible CauseCorrective Action
No soundPower/connectionsEnsure power adapter is connected; check audio cable connections; verify volume is not muted.
Distorted audioVolume levelReduce volume on speaker and source device; check for loose connections.
LED not illuminatedPower issueCheck power outlet; ensure power adapter is properly connected.
No sound from headphonesConnection/volumeEnsure headphones are fully plugged in; adjust volume on speaker.
Intermittent soundLoose cablesCheck all cable connections; replace damaged cables.

Reset: Disconnect power for 30 seconds, then reconnect.

Service: Contact Bose customer support; www.bose.com

Bose Companion 1 Manual © - All Rights Reserved 2025