Bose CineMate 2 GS Manual

The Bose CineMate 2 GS is a 2.1-channel home theater speaker system designed to enhance TV and movie audio. It includes two cube speakers, a hideaway Acoustimass module (bass unit), a universal remote control, and necessary cables. The system features simple setup, dialogue enhancement technology, and is compatible with most TVs and video sources. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Using the Remote Control 8. Audio Settings 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Two cube speakers, Acoustimass module, Universal Remote Control, Audio input cable, Optical digital audio cable, Power cord.

Feature	Description
Cube speakers	Compact satellite speakers for left/right channels
Acoustimass module	Hideaway bass unit for low-frequency effects
Universal remote	Controls system, TV, and other devices
Dialogue enhancement	Clarifies speech for better understanding
Audio inputs	Optical digital and analog stereo inputs
Power cord	For AC power connection
Volume control	Adjusts overall system volume
Bass control	Adjusts low-frequency output level
Status light	Indicates power and input selection
Auto-wake	System turns on when audio signal is detected

Installation

Unpack and inspect contents. Place components in desired locations.

Position cube speakers: Place left/right speakers near TV, at ear level when seated.
Place Acoustimass module: Hide module out of sight (under furniture, in corner).
Connect speakers: Use provided cables to connect cube speakers to Acoustimass module.
Connect to TV: Use optical digital cable or analog audio cable from TV to system.
Plug into AC power.

WARNING! Ensure proper ventilation; do not block vents on Acoustimass module.

First-Time Setup

Power on system; follow initial audio setup.

Power connection: Plug power cord into outlet and Acoustimass module.
Input selection: Press INPUT on remote to select correct audio source (OPTICAL or ANALOG).
Volume adjustment: Set initial volume to medium level using remote.
Remote setup: Program universal remote to control TV (see remote manual).
Test audio: Play TV content to verify sound from both cube speakers and bass.

CAUTION! Keep speakers away from heat sources and moisture.

Specifications

System Type: 2.1-channel home theater speaker system.
Speaker Drivers: Proprietary Bose technology in cube speakers and bass module.
Audio Inputs: Optical digital (Toslink), analog stereo (RCA).
Power Output: Amplified system with built-in amplification.
Remote Control: Universal remote with learning capability.
Dimensions (each cube): Approximately 4.5" H x 3.5" W x 3.5" D.
Dimensions (Acoustimass module): Approximately 17" H x 7.5" W x 7.5" D.
Power Source: 120V AC, 60Hz.
Operating Temp: 41°F to 95°F (5°C to 35°C).

Controls and Settings

Primary controls via remote control. Acoustimass module has status light and connection ports.

Remote: POWER, INPUT (selects audio source), VOLUME UP/DOWN, MUTE, BASS +/-.

Audio Settings: Dialogue enhancement (improves speech clarity), Bass level adjustment, Input selection (OPTICAL/ANALOG). System Status: Light indicates power (green) and input selection (amber for analog, white for optical).

Connecting Devices

TV Connection: Optical digital (recommended) or analog audio output. Other Sources: DVD/Blu-ray players, gaming consoles via TV or direct connection.

Turn off all devices before connecting.
Connect TV audio output to system input using appropriate cable.
For optical connection: Remove protective caps, insert firmly into ports.
Select corresponding input on system using remote.

Tip: Use optical connection for best audio quality from digital sources.

Using the Remote Control

Controls system functions and can be programmed for TV control.

System power: Press POWER to turn system on/off.
Volume control: Use VOLUME buttons to adjust level; press MUTE to silence.
Input selection: Press INPUT to cycle between OPTICAL and ANALOG inputs.
Bass adjustment: Press BASS + or - to increase/decrease low frequencies.
TV control: Program remote to control TV power, volume, and input (see programming guide).
Battery replacement: Open battery compartment, install two AAA batteries.

WARNING! Do not mix old and new batteries. Dispose of batteries properly.

Audio Settings

Dialogue Enhancement: Automatically emphasizes vocal frequencies for clearer speech. Bass Level: Adjust to preference using remote (default is center position). Input Priority: System defaults to optical input if both optical and analog are connected.

Care & Cleaning

Unplug system before cleaning. Wipe cube speakers and Acoustimass module with dry, soft cloth. Do not use liquids or chemical cleaners.

CAUTION! Do not open any components; no user-serviceable parts inside.

Regulatory Information

FCC Compliance: Class B digital device; complies with Part 15 of FCC rules. Copyright © Bose Corporation. Trademarks used under license. For support, visit www.bose.com or contact Bose Customer Service at 1-800-999-2673.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No sound from system	Power/connections	Ensure system is powered on; check audio cables are secure; select correct input.
No bass output	Bass level/connections	Adjust bass level on remote; verify speaker cables to Acoustimass module are connected.
Remote not working	Batteries/obstructions	Replace batteries; ensure clear path to system's IR sensor.
Audio distortion	Volume too high	Reduce volume level on system and source device.
No optical audio	TV settings/cable	Ensure TV audio output is set to PCM or Bitstream; check optical cable connection.

Reset: Unplug system from power for 60 seconds, then reconnect.

Service: 1-800-999-2673; www.bose.com/support