Bose Cinemate 1SR Soundbar Manual

The Bose Cinemate 1SR is a premium soundbar system designed to enhance your TV audio experience. It features a sleek, low-profile design, integrated amplification, proprietary Bose technologies for clear dialogue and immersive sound, a wireless Acoustimass module for deep bass, a universal remote control, and multiple audio inputs including optical digital, coaxial digital, and analog stereo. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Using the Remote Control 8. Sound Modes & Adjustments 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Soundbar, Wireless Acoustimass Module (bass unit), Remote Control, Power Cords, Optical Digital Cable, Stereo Audio Cable.

Feature	Description
Soundbar	Low-profile speaker array with integrated amplifiers
Wireless Acoustimass Module	For deep, impactful bass without visible wires to the soundbar
Universal Remote	Controls soundbar, TV, and other devices
Optical Digital Input	For high-quality digital audio from TV or media player
Coaxial Digital Input	Alternative digital audio connection
Analog Stereo Input	For standard audio sources
Dialogue Mode	Enhances vocal clarity for movies and TV shows
Bass Control	Adjusts the level of low-frequency effects
POWER	Turns system on/off (standby)
INPUT	Cycles between connected audio sources

Installation

Unpack and inspect all components. Place soundbar below or above your TV.

Position the Soundbar: Place directly below your TV, centered, on a shelf or mounted on the wall.
Position the Acoustimass Module: Place near a wall or in a corner of the room for optimal bass response.
Connect to Power: Plug the soundbar and the Acoustimass module into AC power outlets.
Connect to TV: Use the included optical cable (recommended) from your TV's optical audio output to the soundbar's OPTICAL input.

WARNING! Ensure the Acoustimass module is at least 1 foot (30 cm) from walls for proper ventilation. Do not block vents.

First-Time Setup

Power on the system; the soundbar and module will automatically pair.

Power On: Press POWER on the remote or soundbar. The status light will illuminate.
Pairing: The wireless module should pair automatically. A solid white light indicates successful pairing.
Select Input: Press INPUT on the remote to select the correct source (e.g., OPT for optical connection).
Adjust Volume: Use the remote or buttons on the soundbar to set initial volume.
Configure Remote: Program the universal remote to control your TV (see remote manual).

CAUTION! Do not place the soundbar inside an enclosed cabinet, as this will muffle sound.

Specifications

System Type: 2.1-channel soundbar with wireless subwoofer.
Total Power: Not specified by Bose (proprietary amplification).
Frequency Response: Optimized for home theater and music.
Inputs: Optical Digital, Coaxial Digital, Analog Stereo (3.5mm).
Outputs: None (self-contained system).
Wireless: Proprietary wireless link to Acoustimass module.
Remote: Universal infrared remote control.
Power Source: 120V AC, 60Hz (varies by region).
Dimensions (Soundbar): Slim, low-profile design (exact dimensions in packaging).

Controls and Settings

Access basic controls via the remote or buttons on the top of the soundbar.

Soundbar Buttons: POWER, INPUT, VOLUME UP, VOLUME DOWN, MUTE.

Remote: POWER, Numeric buttons (for device control), INPUT, VOLUME, MUTE, DIALOGUE (mode), BASS (control), SETUP (for programming).

Sound Modes: DIALOGUE mode enhances speech clarity. Bass Control: Adjusts the level of the wireless subwoofer. Input Selection: Cycle between OPT, COAX, and AUX inputs.

Connecting Devices

TV (Optimal): Use optical digital cable. Other Sources: Use coaxial digital or analog stereo cable.

Turn off all devices before making connections.
Connect the audio output from your source (TV, Blu-ray player, game console) to the desired input on the soundbar.
Select the corresponding input on the soundbar using the INPUT button.
Set your TV or source device to output audio to the external speaker system.

Tip: For best audio quality, use the optical digital connection. Ensure the protective caps are removed from the optical cable ends.

Using the Remote Control

The universal remote can control the soundbar, your TV, and other devices.

Soundbar Control: Basic functions (power, volume, input, mute) work immediately.
Program for TV: Press and hold TV then SETUP until the remote light blinks. Enter your TV's code (see code list in manual).
Volume Control: The remote can be set to always control the soundbar's volume, regardless of the selected device.
Mute: Press MUTE to silence audio; press again or adjust volume to unmute.
Input Select: Press INPUT to cycle through OPT, COAX, and AUX.

WARNING! Keep remote away from moisture and extreme heat. Replace batteries when performance weakens.

Sound Modes & Adjustments

Dialogue Mode: Press DIALOGUE button to enhance vocal frequencies for clearer speech. Bass Control: Press BASS button, then use volume up/down to adjust subwoofer level to your preference.

Care & Cleaning

Unplug from power before cleaning. Wipe the soundbar and module with a soft, dry cloth. Do not use liquids, sprays, or abrasive cleaners.

CAUTION! Do not allow liquids to enter any openings. Do not open the casing; no user-serviceable parts inside.

Regulatory Information

FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to interference that may cause undesired operation. ICES-003 (Canada): Complies with Canadian ICES-003 Class B digital apparatus. Copyright © Bose Corporation. Bose and the Bose logo are trademarks of Bose Corporation. For support, visit www.bose.com/support or contact Bose Customer Service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No sound from soundbar	Input selection/volume	Ensure correct INPUT is selected; increase volume; check TV audio output settings.
No sound from bass module	Power/wireless link	Ensure module is plugged in and powered on. Re-pair by unplugging both units for 1 minute, then plugging in soundbar first.
Remote does not work	Batteries/obstructions	Replace batteries; ensure clear path to soundbar's IR sensor (front right).
Audio is out of sync (lip sync)	TV processing delay	Check your TV's audio settings for a "Lip Sync," "Audio Delay," or "AV Sync" adjustment.
Intermittent sound or dropouts	Wireless interference	Relocate cordless phone base, router, or other wireless devices away from the soundbar and module.

Reset: Unplug the soundbar and the Acoustimass module from power for one full minute, then reconnect.

Service: For product service, visit www.bose.com/support or contact authorized Bose service centers.