Bose Cinemate 11 Manual

The Bose Cinemate 11 is a 2.1-channel home theater speaker system designed to enhance TV and movie audio. It features a compact Acoustimass module, two proprietary cube speakers, a universal remote control, and Bose's proprietary TrueSpace surround processing. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Using the Remote Control 8. Audio Settings & Optimization 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Acoustimass module (subwoofer), Two cube speakers, Universal remote control, Power cord, Speaker cables, Audio connection cables.

Feature	Description
Acoustimass module	Compact bass module for deep, clear low frequencies
Proprietary cube speakers	Small speakers designed for clear dialogue and spacious sound
Universal remote	Controls Cinemate 11, TV, and other connected devices
TrueSpace processing	Bose technology for a more immersive surround sound experience
Audio input ports	Optical digital, coaxial digital, and analog stereo inputs
Standby/Auto-wake	System powers on automatically when audio signal is detected
Volume control	Master volume control on remote and Acoustimass module
Bass adjustment	Adjustable bass level on the Acoustimass module
Speaker cable management	Included cable management clips for neat installation
Wall-mount capable	Cube speakers include optional wall-mount brackets

Installation

Unpack and inspect all components. Choose optimal placement for speakers and Acoustimass module.

Position Acoustimass module: Place near TV or entertainment center, not in enclosed cabinet.
Position cube speakers: Place on either side of TV, at ear level when seated.
Connect speakers: Use included color-coded cables to connect cubes to Acoustimass module.
Connect audio source: Use optical, coaxial, or analog cable from TV/device to Acoustimass module.
Connect power: Plug Acoustimass module into AC outlet.

WARNING! Ensure proper ventilation around Acoustimass module. Do not block vents.

First-Time Setup

Power on system; follow initial configuration steps.

Power connection: Plug in Acoustimass module; indicator light should illuminate.
Remote setup: Program universal remote to control TV (see remote manual).
Audio source selection: Press INPUT button on remote to select correct audio source (OPT, COAX, or AUX).
Volume adjustment: Set initial volume to low level, then adjust to preference.
Bass adjustment: Adjust bass control on Acoustimass module to match room acoustics.

CAUTION! Keep speaker cables away from power cords to avoid interference.

Specifications

System Type: 2.1-channel home theater speaker system.
Total System Power: Not specified by Bose (proprietary amplification).
Frequency Response: Optimized for TV and movie content.
Inputs: Optical digital, Coaxial digital, Analog stereo (RCA).
Speaker Dimensions (each cube): Approximately 2.5"H x 4"W x 4"D.
Acoustimass Module Dimensions: Approximately 14"H x 6"W x 16"D.
Power Requirements: 120V AC, 60Hz (US model).
Remote Control: Infrared universal remote with learning capability.
Warranty: Limited warranty - refer to Bose documentation.

Controls and Settings

Primary controls via remote control. Acoustimass module has power indicator, bass control, and volume knob.

Remote Functions: POWER, INPUT selection, VOLUME up/down, MUTE, TV control buttons, SETUP for programming.

Audio Settings: Bass level (rotary knob on module), Input selection (OPT/COAX/AUX), TrueSpace processing (always active). System Settings: Remote programming for TV control, Auto-wake sensitivity (fixed).

Connecting Devices

TV Connection: Use optical or coaxial digital output from TV to Cinemate 11. Other Devices: DVD/Blu-ray players, game consoles, streaming devices via available inputs.

Turn off all devices before making connections.
Use high-quality digital optical cable for best audio quality.
Ensure TV audio output is set to PCM or Bitstream (not Dolby Digital if using optical).
Select corresponding input on Cinemate 11 using remote INPUT button.

Tip: For older TVs without digital outputs, use analog RCA cables from TV audio outputs to AUX input.

Using the Remote Control

Universal remote controls Cinemate 11 and TV basic functions.

Power control: POWER button turns Cinemate 11 on/off; may control TV if programmed.
Volume control: VOLUME buttons control Cinemate 11 master volume.
Input selection: Press INPUT to cycle through OPT, COAX, AUX inputs.
Mute: Press MUTE to silence audio; press again or adjust volume to restore.
TV control: Programmed buttons control TV power, volume, input selection.
Remote programming: See separate setup guide for programming TV codes.

WARNING! Replace remote batteries when performance decreases. Use fresh alkaline batteries.

Audio Settings & Optimization

Bass Adjustment: Rotate bass control on Acoustimass module clockwise to increase, counterclockwise to decrease. Speaker Placement: Optimal placement enhances TrueSpace processing effect. Room Calibration: System is pre-tuned; adjust bass to room characteristics.

Care & Cleaning

Unplug from power before cleaning. Wipe speakers and module with dry, soft cloth. Do not use liquids or cleaners.

CAUTION! Do not allow liquids to enter vents or speaker openings. Keep away from moisture.

Regulatory Information

FCC Compliance: This device complies with Part 15 of FCC Rules. Copyright © Bose Corporation. All rights reserved. Bose, Cinemate, Acoustimass, and TrueSpace are trademarks of Bose Corporation. For support, visit www.bose.com or contact Bose Customer Service at 1-800-999-2673.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No sound from system	Power/connections	Ensure power cord connected; check audio cable connections; select correct input.
No sound from one speaker	Speaker cable	Check cable connection at both speaker and module; ensure secure connection.
Remote not working	Batteries/obstructions	Replace batteries; ensure clear path to module IR sensor; reprogram if needed.
Intermittent sound	Loose connections	Check all cable connections; try different audio cable.
Excessive or insufficient bass	Bass setting/placement	Adjust bass control on module; reposition module away from corners if bass is excessive.
System doesn't auto-wake	Signal/standby mode	Ensure audio source is active; increase source volume; system may need manual power on.

Reset: Unplug power for 60 seconds, then reconnect to reset system.

Service: 1-800-999-2673; www.bose.com/support