Bose CD Player Radio Manual

The Bose CD Player Radio is a premium audio system combining a high-fidelity CD player with an AM/FM radio tuner, featuring Bose proprietary speaker technology, digital signal processing, preset stations, remote control, audio input for external devices, sleep timer, and customizable sound profiles. Powered by AC adapter or batteries for portability. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Playing CD Media 8. Radio Operation 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Bose acoustic waveguide speaker system, CD player mechanism, AM/FM tuner, Remote Control, AUX input jack, Headphone jack, Power input.

FeatureDescription
CD PlayerPlays audio CDs, CD-R, CD-RW formats
AM/FM Radio Tuner30 station presets (15 AM, 15 FM)
AUX Input3.5mm jack for connecting external audio sources
Headphone JackFor private listening with 3.5mm headphones
Power InputFor AC adapter connection
Battery CompartmentFor portable operation (requires 6 D-cell batteries)
OPEN/CLOSEEjects CD from tray
PRESET StationsQuick access to saved radio stations
MUTEMutes audio output
POWERTurns system on/off

Installation

Unpack and inspect contents. Place on stable, level surface.

  1. Connect power: Insert AC adapter plug into power input, then into wall outlet.
  2. For battery operation: Open battery compartment, insert 6 D-cell batteries observing polarity.
  3. Connect antenna: Extend FM wire antenna; position AM loop antenna for best reception.
  4. Connect audio sources: Use AUX input for MP3 players, smartphones, or other devices.

WARNING! Use only Bose-approved AC adapter. Do not mix old and new batteries.

First-Time Setup

Power on system; follow initialization sequence.

  1. Set clock: Press and hold CLOCK button, use TUNING knob to set time.
  2. Program radio stations: Tune to desired station, press and hold PRESET button (1-15) for 2 seconds.
  3. Configure CD settings: Use SETUP menu for repeat, shuffle, and resume playback options.
  4. Adjust sound: Use TONE controls (BASS/TREBLE) or select preset sound profiles.

CAUTION! Keep away from heat sources and moisture. Allow ventilation around unit.

Specifications

Controls and Settings

Front Panel: POWER, OPEN/CLOSE, VOLUME knob, TUNING knob, BASS/TREBLE controls, PRESET buttons, DISPLAY.

Remote: POWER, Numeric buttons (0-9), OPEN/CLOSE, MODE (CD/RADIO/AUX), VOLUME +/- , MUTE, PRESET +/- , PLAY/PAUSE, STOP, SKIP, TUNING, DISPLAY.

CD Settings: Repeat (OFF/TRACK/ALL), Shuffle (ON/OFF), Resume (ON/OFF). Radio Settings: Manual/Auto tuning, Preset memory, Mono/Stereo (FM). Audio: BASS (-10 to +10), TREBLE (-10 to +10), Loudness (ON/OFF). System: Clock setting, Sleep timer (15-90 min), Backlight adjustment.

Connecting Devices

AUX Input: For external audio sources. Headphone: Standard 3.5mm jack.

  1. Turn off system before connecting devices.
  2. Connect 3.5mm audio cable from device to AUX input jack.
  3. Select AUX mode using MODE button or remote.
  4. Adjust volume on both source device and Bose system.

Tip: For best audio quality, use high-quality audio cables and keep cables away from power cords.

Playing CD Media

Supports audio CDs, CD-R, CD-RW (must contain audio tracks).

  1. Insert disc: Press OPEN/CLOSE, place CD label-side up in tray, press again to close.
  2. Play: Press PLAY; system reads TOC then begins playback.
  3. Navigate: Use SKIP (<< / >>) for previous/next track; SCROLL for fast forward/rewind.
  4. Stop: Press STOP once for pause, twice to stop and remember position (if resume enabled).
  5. Eject: Press OPEN/CLOSE during stop mode.
  6. Program play: Press PROGRAM, select tracks in desired order using numeric buttons.
  7. Repeat/Shuffle: Press REPEAT or SHUFFLE during playback to activate modes.
  8. Display: Shows track number, elapsed time, total tracks.

WARNING! Do not touch CD laser lens. Keep CDs clean and free of scratches.

Radio Operation

AM/FM reception with 30 presets.

  1. Select band: Press BAND to toggle between AM and FM.
  2. Tune manually: Use TUNING knob or TUNE +/- buttons.
  3. Auto-scan: Press and hold TUNE for automatic station seeking.
  4. Save presets: Tune to station, press and hold desired PRESET button (1-15) for 2 seconds.
  5. Recall presets: Press PRESET button or use PRESET +/- buttons.
  6. FM stereo/mono: In SETUP menu, select MONO for weak signal areas.

Note: For best FM reception, fully extend wire antenna and position vertically.

Care & Cleaning

Unplug AC adapter before cleaning. Use soft, dry cloth for exterior. CD lens cleaner can be used periodically.

CAUTION! Never use solvents, abrasives, or spray cleaners. Do not insert objects into CD slot or speaker ports.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Bose Corporation. All rights reserved. Bose and the Bose logo are registered trademarks of Bose Corporation. For support, visit www.bose.com/support or contact 1-800-999-2673.

Troubleshooting

SymptomPossible CauseCorrective Action
No powerPower connection/batteriesCheck AC adapter connection; replace batteries if used.
CD won't playDisc format/damageEnsure disc is audio CD format; clean disc; check for scratches.
Poor radio receptionAntenna/positionExtend FM antenna fully; reposition AM loop antenna; avoid obstructions.
No sound from AUXConnection/modeEnsure cable fully inserted; select AUX mode; check source device volume.
Remote not workingBatteries/obstructionsReplace batteries; point remote at IR sensor on front panel; remove obstacles.

Reset: Unplug AC adapter and remove batteries for 2 minutes to reset system.

Service: 1-800-999-2673; www.bose.com/support

Bose CD Player Radio Manual © - All Rights Reserved 2025