Bose Bluetooth SoundLink Speaker Manual

The Bose Bluetooth SoundLink Speaker is a portable wireless speaker designed for high-quality audio streaming via Bluetooth from compatible devices such as smartphones, tablets, and computers. It features built-in rechargeable battery, voice prompts for easy pairing, auxiliary input for wired connections, and intuitive controls for power, volume, Bluetooth pairing, and track management. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Portable speaker unit, USB charging cable, AC power adapter, Auxiliary audio cable.

Package Contents

Unpack and verify all items are present.

1. Bose SoundLink Bluetooth Speaker
2. USB charging cable
3. AC power adapter
4. Auxiliary audio cable (3.5mm to 3.5mm)
5. Protective carrying case (model dependent)
6. Quick Start Guide
7. Safety and Warranty Information

WARNING! Keep plastic bags away from children to avoid suffocation hazard. Inspect contents for damage.

Initial Setup & Charging

Before first use, fully charge the speaker.

1. Connect the USB charging cable to the speaker's USB port.
2. Plug the AC adapter into a standard wall outlet (100-240V, 50/60Hz).
3. Charge until the battery indicator shows full (typically 3 hours).
4. Power on the speaker by pressing and holding the Power button.
5. Listen for the voice prompt indicating power on and battery level.

CAUTION! Use only the provided Bose charging cable and adapter. Do not expose to extreme temperatures while charging.

Specifications

• Bluetooth Version: Bluetooth 4.0 with A2DP, AVRCP profiles.
• Wireless Range: Up to 30 feet (10 meters) in open space.
• Battery Life: Up to 8 hours of continuous playback (varies by volume).
• Charging Time: Approximately 3 hours for full charge.
• Inputs: Bluetooth, 3.5mm auxiliary input.
• Output Power: Model-specific wattage for clear audio projection.
• Frequency Response: Optimized for voice and music reproduction.
• Dimensions & Weight: Compact design, lightweight for portability.
• Power Source: Built-in rechargeable lithium-ion battery; AC adapter input: 100-240V, 50/60Hz.
• Operating Temperature: 32°F to 95°F (0°C to 35°C).

Controls and Indicators

Top Panel: Power button, Bluetooth button, Volume Up/Down, Multi-function button (play/pause, track skip), Auxiliary input jack, Battery indicator LEDs, USB charging port.

Indicator Lights: Bluetooth LED (flashing for pairing, solid for connected), Battery LEDs (show charge level: green=high, amber=medium, red=low, flashing red=needs charge).

Voice Prompts: Announce power on/off, Bluetooth device connected/disconnected, battery level (high/medium/low), entering pairing mode.

Bluetooth Pairing

Pair with your Bluetooth device for wireless audio streaming.

1. Turn on the speaker; listen for "Ready to connect" or see flashing Bluetooth LED.
2. On your smartphone/tablet/computer, enable Bluetooth in settings.
3. Select "Bose SoundLink" from the list of available devices.
4. If prompted, enter PIN '0000' (four zeros) or confirm pairing.
5. Listen for "Connected to [device name]" voice confirmation.
6. For multi-point: To pair a second device, put first device in standby and repeat steps.

Tip: Ensure the speaker is within 30 feet and no obstructions block the signal.

Playing Audio

Once paired, audio from your device streams to the speaker.

1. Play audio on your Bluetooth device (music, podcast, etc.).
2. Control playback using the speaker's multi-function button:
   • Press once to play/pause.
   • Press twice quickly to skip to next track.
   • Press three times quickly to go back to previous track.
3. Adjust volume using Volume Up/Down buttons on speaker or device.
4. To switch between paired devices, pause audio on first device, play on second.
5. To disconnect, turn off Bluetooth on your device or power off speaker.

WARNING! Do not expose speaker to liquids. Avoid high volume levels for extended periods to prevent hearing damage.

Using the Auxiliary Input

For devices without Bluetooth, use the auxiliary input.

1. Connect one end of the auxiliary cable to the speaker's AUX IN jack.
2. Connect the other end to the headphone jack of your audio source.
3. The speaker will automatically switch to auxiliary input when cable is connected.
4. Play audio on your source device; control volume from speaker or source.
5. To return to Bluetooth, disconnect the auxiliary cable.

Note: Ensure cable is fully inserted for best audio quality.

Care & Maintenance

Unplug and power off before cleaning. Use a soft, dry cloth; do not use liquids or abrasive cleaners.

Battery Care: For longest battery life, avoid complete discharges; recharge when battery indicator shows low. If not using for extended periods, store with 50% charge in a cool, dry place.

CAUTION! Do not expose to water, extreme heat, or direct sunlight for prolonged periods. Do not attempt to disassemble or replace battery.

Regulatory Information

FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. ICES-003 Compliance: Class B digital apparatus. Contains FCC ID: XXXXXXXXXXX and IC: XXXXXXXXXXX. Copyright © Bose Corporation. Bose and SoundLink are trademarks of Bose Corporation. For support, visit www.bose.com/support or contact Bose Customer Service.

Troubleshooting

Reset: If issues persist, reset the speaker by pressing and holding Power button for 10 seconds until it powers off, then restart.

Service: For warranty service or technical support, visit www.bose.com/support or call Bose Customer Service.