Bose Bluetooth Adapter User Manual

The Bose Bluetooth Adapter is a compact wireless audio receiver designed to add Bluetooth connectivity to compatible Bose sound systems and speakers. It supports high-quality audio streaming via Bluetooth, features easy pairing, LED status indicators, USB power, and compatibility with various Bose products. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Bluetooth Adapter unit, USB power cable, LED indicator light, Pairing button, Audio output ports.

Installation

Unpack and inspect contents. Ensure compatible Bose system is available.

1. Connect to Bose system: Use provided audio cable to connect adapter's output to Bose system's AUX input.
2. Power the adapter: Connect USB cable to adapter and plug into USB power source.
3. Position adapter: Place near Bose system within Bluetooth range of streaming device.
4. Turn on Bose system: Set Bose system to AUX input mode.

WARNING! Use only provided or recommended cables. Ensure stable power source.

First-Time Setup

Power on adapter; follow pairing steps.

1. Power on: Connect USB power; LED will blink or show solid light.
2. Enter pairing mode: Press and hold Pairing button until LED flashes rapidly.
3. Pair with device: On Bluetooth device, search for "Bose Bluetooth Adapter" and select.
4. Confirm connection: LED becomes solid, indicating successful pairing.
5. Adjust audio: Use Bose system's volume controls for desired level.

CAUTION! Keep adapter away from heat sources and liquids.

Specifications

• Bluetooth Version: 4.2 or higher.
• Audio Codecs: Supports SBC, AAC.
• Range: Up to 30 feet (10 meters).
• Power: 5V DC via USB.
• Output: Stereo audio via RCA or 3.5mm jack.
• LED Indicators: Power, pairing, connection status.
• Compatibility: Bose sound systems with AUX input; iOS, Android, Windows devices.
• Operating Temp: 32°F to 104°F (0°C to 40°C).
• Dimensions: Compact design for easy placement.

Controls and Settings

Adapter features minimal controls: Pairing button, LED indicator.

LED Status: Solid blue = connected; Flashing blue = pairing mode; Off = no power.

Pairing: Press and hold Pairing button for 3 seconds to enter pairing mode. Reset: Unplug and replug to reset adapter. Audio Settings: Adjust volume on streaming device or Bose system. Compatibility: Ensure Bose system is set to correct input (AUX).

Connecting Devices

Connect to various Bluetooth-enabled devices.

1. Ensure adapter is in pairing mode (LED flashing).
2. On device, enable Bluetooth and search for devices.
3. Select "Bose Bluetooth Adapter" from list.
4. Enter PIN if prompted (default 0000 or 1234).
5. Confirm connection (LED solid).

Tip: For multiple devices, disconnect current device before pairing new one.

Bluetooth Pairing & Streaming

Stream audio from smartphones, tablets, computers.

1. Power on adapter and Bose system.
2. Pair device as described above.
3. Play audio on device; sound will stream to Bose system.
4. Control playback: Use device controls for play, pause, skip.
5. Disconnect: Turn off device Bluetooth or adapter.
6. Reconnect: Adapter auto-reconnects to last device when in range.

WARNING! Keep adapter within Bluetooth range for stable connection.

Accessibility Features

Simple pairing for easy use. LED indicators for visual status. Compatible with devices featuring accessibility settings.

Care & Cleaning

Unplug before cleaning. Use dry, soft cloth; avoid liquids.

CAUTION! Do not use abrasive cleaners; store in dry place.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. Copyright © Bose Corporation; trademarks owned by Bose. For support, visit www.bose.com or contact Bose customer service.

Troubleshooting

Reset: Unplug adapter for 10 seconds, then replug.

Service: Contact Bose support; www.bose.com