The Bose AWRCC2 is a wireless remote control designed for Bose audio systems, featuring infrared (IR) transmission, compatibility with select Bose products, programmable functions, battery operation, and an ergonomic design. Below are key sections for overview, features, setup, operation, battery replacement, troubleshooting, and specifications.
Key components: IR transmitter, battery compartment, control buttons, LED indicator, and ergonomic casing.
| Feature | Description |
|---|---|
| Wireless Operation | Infrared (IR) control up to 30 feet (9 meters) |
| Compatibility | Designed for Bose Lifestyle® systems, Wave® systems, and select audio products |
| Battery Type | Uses two AAA batteries (included) |
| Programmable Buttons | Learn function for custom commands |
| LED Indicator | Shows battery status and programming mode |
| Ergonomic Design | Fits comfortably in hand with intuitive button layout |
| Power Button | Turns controlled device on/off |
| Volume Controls | Up/down buttons for audio adjustment |
| Source Selection | Switches between audio inputs (e.g., AUX, CD, Tuner) |
| Mute Function | Instantly mutes audio output |
Unpack and verify all items are present.
NOTE: If any item is missing or damaged, contact Bose customer support immediately.
Prepare remote for first use with your Bose system.
CAUTION! Use only AAA batteries. Do not mix old and new batteries.
Front button layout and indicators.
Top Row: POWER, MUTE, DISPLAY.
Center: Navigation arrows (Up/Down/Left/Right), ENTER, BACK.
Bottom Row: Numeric buttons (0-9), VOLUME +/- , SOURCE SELECT.
Side: Battery compartment cover.
LED Indicator: Flashes red during programming; dims when batteries are low.
Controlling your Bose audio system.
Tip: Keep remote pointed directly at device's IR sensor for reliable operation.
Programming the remote to control other devices (e.g., TV, cable box).
NOTE: Not all functions may be programmable. Refer to Bose website for latest codes.
Replace batteries when remote becomes unresponsive or LED dims.
WARNING! Do not use rechargeable batteries unless specified. Keep batteries away from children.
Clean remote with dry, soft cloth. Do not use liquids or abrasive cleaners.
CAUTION! Avoid extreme temperatures, moisture, and dropping remote. Store in a dry place.
FCC Part 15: This device complies with Part 15 of FCC rules. Operation is subject to interference that may cause undesired operation. Copyright © Bose Corporation. Bose and the Bose logo are trademarks of Bose Corporation. For support, visit www.bose.com/support or contact 1-800-999-2673.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Remote not working | Dead batteries, obstruction | Replace batteries; ensure clear line of sight to IR sensor. |
| Intermittent operation | Weak batteries, distance | Replace batteries; move within 30 feet of device. |
| LED not flashing | Batteries installed incorrectly | Check battery polarity and reinstall. |
| Cannot program | Incorrect code, mode error | Verify device code; repeat programming steps carefully. |
| Buttons unresponsive | Battery corrosion, damage | Clean battery contacts with dry cloth; inspect for physical damage. |
Reset: Remove batteries for 30 seconds, then reinstall to reset remote.
Service: 1-800-999-2673; www.bose.com/support