bose awrcc1 manual turn on

The Bose AWRCC1 is a wireless remote control designed for Bose audio systems, featuring power control, volume adjustment, source selection, and preset functions. Properly turning on the connected Bose system using the AWRCC1 remote is essential for operation. Below are key sections for safety, features, installation, setup, operation, and troubleshooting related to powering on the system.

1. Features at a Glance 2. Installation & Setup 3. First-Time Power On 4. Specifications 5. Controls and Functions 6. Connecting to Bose System 7. Power On Procedures 8. Troubleshooting Power Issues 9. Battery Replacement 10. Regulatory Information 11. Frequently Asked Questions

Features at a Glance

Key components: Wireless infrared (IR) remote control, Power button, Volume controls, Source selection, Numeric presets, Battery compartment.

Feature	Description
POWER Button	Turns the connected Bose audio system on and off
Volume +/- Buttons	Adjusts audio output level
Source Select	Cycles through input sources (e.g., AUX, Tuner, CD)
Numeric Presets (1-6)	Recalls stored radio station presets
Mute Button	Instantly silences audio output
IR Transmitter	Sends infrared signals to the Bose system
Battery Compartment	Holds two AAA batteries for power
Ergonomic Design	Fits comfortably in hand with clearly labeled buttons

Installation & Setup

Unpack the remote and inspect for damage. Ensure the Bose audio system is properly connected to power and audio sources.

Insert Batteries: Open battery compartment on back of remote, insert two AAA batteries observing correct polarity (+/-).
Position Bose System: Place the main Bose unit within clear line of sight of the remote's IR sensor (usually on front panel).
Power Connection: Plug the Bose system into a standard 120V AC outlet using provided power cord.
Initial System Check: Ensure Bose system display is visible and ready to receive commands.

WARNING! Use only recommended battery types. Do not mix old and new batteries.

First-Time Power On

To turn on your Bose system for the first time using the AWRCC1 remote:

Ensure the Bose system is plugged into a working electrical outlet.
Point the AWRCC1 remote directly at the IR sensor on the Bose system (within 20 feet).
Press and release the POWER button (usually red or labeled with a power symbol).
Observe the Bose system for power indicator light or display illumination.
If system doesn't respond, check battery installation and ensure no obstacles block the IR path.

NOTE: Some Bose systems may enter standby mode first; a second press might be needed for full power.

Specifications

Model: Bose AWRCC1 Wireless Remote Control
Compatibility: Designed for specific Bose audio systems (check system manual)
Power Source: 2 x AAA batteries (included in some packages)
Operating Range: Up to 20 feet (6 meters) with clear line of sight
Signal Type: Infrared (IR)
Buttons: Power, Volume +/-, Mute, Source, Numeric 1-6, Tuner Presets
Battery Life: Approximately 12 months with normal use
Dimensions: Standard remote size (exact measurements vary)

Controls and Functions

Primary controls for power management:

Power Button: Central to turning system on/off. Press once to toggle power state.

Volume Controls: Adjust sound level after system is powered on.

Source Button: Selects input (e.g., CD, AUX, TUNER) once system is active.

Mute: Temporarily silences audio without powering off.

Numeric Buttons: For direct tuning to preset radio stations when in tuner mode.

Indicator: No LED on remote; confirm operation by Bose system response.

Connecting to Bose System

The AWRCC1 remote communicates via infrared with compatible Bose systems.

Ensure the Bose system model is compatible with AWRCC1 (check product documentation).
Remove any protective film from the remote's IR transmitter window.
Position the remote so it points directly at the Bose system's IR receiver.
Avoid placing objects between remote and system that could block IR signals.
For best results, use in environments without strong direct sunlight on IR sensor.

Tip: If the remote seems unresponsive, try moving closer to the Bose system (within 10 feet).

Power On Procedures

Standard and alternative methods to turn on your Bose system:

Standard Remote Power On: Point AWRCC1 at system, press POWER button briefly.
Direct System Power: If remote fails, use power button on Bose system itself (usually on front or top panel).
Power On from Standby: Some systems have a standby indicator; press POWER to wake.
Auto-On Features: Certain Bose systems may power on automatically when an audio signal is detected at a selected input.
Power On Sequence: System may display startup sequence or show source indicator when successfully powered on.

WARNING! Do not press POWER repeatedly if system doesn't respond immediately; wait 5 seconds between attempts.

Troubleshooting Power Issues

Symptom	Possible Cause	Corrective Action
Remote does not turn on system	Dead batteries, obstruction, distance	Replace batteries; ensure clear line of sight; move within 20 feet.
System doesn't power on with remote	Bose system not plugged in	Check power cord connection at outlet and system.
Intermittent response	Weak batteries, IR interference	Install fresh batteries; reduce fluorescent lighting or other IR sources.
Only some buttons work	Remote damage or dirty contacts	Clean remote surface; ensure no button is stuck; consider replacement.
System powers on but no sound	Volume muted, incorrect source	Press MUTE to unmute; select correct source (e.g., AUX for connected device).

Reset: Remove batteries for 30 seconds, then reinsert to reset remote electronics.

Battery Replacement

Replace batteries when remote response becomes weak or inconsistent.

Slide open battery compartment cover on back of remote.
Remove old batteries, observing polarity orientation.
Insert two new AAA batteries, matching + and - markings.
Close compartment cover securely.
Test remote by pointing at Bose system and pressing POWER.

CAUTION! Dispose of old batteries properly according to local regulations.

Regulatory Information

FCC Compliance: This device complies with Part 15 of FCC rules. Operation is subject to interference that may cause undesired operation. Copyright © Bose Corporation. Bose and the Bose logo are trademarks of Bose Corporation. For support, visit www.bose.com/support or contact Bose Customer Service at 1-800-999-2673.

Frequently Asked Questions

Q: Can I use the AWRCC1 remote with any Bose system?
A: No, it is designed for specific Bose models. Check your system's compatibility in its manual.

Q: What should I do if the POWER button doesn't work?
A: First replace batteries. If problem persists, try using the system's front panel power button and contact Bose support.

Q: How do I know if the remote is sending a signal?
A: While not visible to human eye, you can test by pointing the remote at a digital camera (phone camera) and pressing a button; you should see a faint light from the IR emitter on camera screen.

Q: Can I program the remote to control other devices?
A: No, the AWRCC1 is pre-programmed specifically for compatible Bose systems and is not user-programmable.