Bose AWRC-1G Instruction Manual

The Bose AWRC-1G is a professional-grade wireless remote control designed for Bose audio systems, featuring RF wireless technology for extended range, multi-zone control capability, backlit buttons for low-light operation, compatibility with various Bose systems, programmable presets, and durable construction for professional environments. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: RF wireless remote control, backlit buttons, multi-zone selector, preset buttons, volume controls, source selection, and system power control.

Installation

Unpack and inspect contents. Ensure all components are present.

1. Insert batteries: Open battery compartment, install 2 AA batteries observing polarity.
2. Position remote: Place in accessible location within operating range.
3. System connection: Ensure Bose system is properly installed and powered.
4. Initial pairing: Follow first-time setup procedure for system recognition.

WARNING! Use only recommended battery types. Do not mix old and new batteries.

First-Time Setup

Power on remote and Bose system; follow pairing procedure.

1. System recognition: Press and hold SETUP button for 5 seconds until LED flashes.
2. Zone assignment: Use zone selector to assign remote to specific zones.
3. Preset programming: Store favorite stations/settings to preset buttons.
4. Range testing: Test remote operation throughout intended area.

CAUTION! Keep remote away from extreme temperatures and moisture.

Specifications

• Wireless Technology: RF (Radio Frequency)
• Operating Range: Up to 100 feet (30 meters) indoors
• Frequency: 2.4 GHz band
• Battery: 2 AA batteries (alkaline recommended)
• Battery Life: Approximately 6 months with normal use
• Controls: Backlit buttons with tactile feedback
• Zones: Controls up to 6 separate audio zones
• Presets: 6 programmable preset buttons
• Compatibility: Bose Lifestyle systems, Professional series
• Operating Temperature: 32°F to 104°F (0°C to 40°C)

Controls and Settings

Access functions via dedicated buttons. Front Panel: POWER, ZONE SELECTOR, PRESET buttons, VOLUME controls, SOURCE SELECTION, MENU navigation.

Button Functions: POWER (system on/off), ZONE (select active zone), PRESET 1-6 (recall stored settings), VOLUME +/- (adjust volume), SOURCE (cycle audio sources), MENU (access system settings).

Settings: Backlight duration (15/30/60 seconds), button beep (on/off), RF channel selection, preset programming, zone assignment, system pairing.

Connecting to Bose Systems

Compatible with Bose Lifestyle and Professional audio systems.

1. Ensure Bose system is powered on and in setup mode.
2. Press and hold SETUP on remote until LED flashes rapidly.
3. On Bose system, confirm remote detection.
4. Assign remote to specific zones as needed.
5. Test all basic functions (volume, source selection).

Tip: For optimal performance, keep remote within line of sight during initial pairing.

Operation and Programming

Daily operation and custom programming features.

1. Power control: Press POWER to turn system on/off.
2. Zone selection: Use ZONE button to cycle through available zones.
3. Volume adjustment: Use VOLUME +/- for master or zone volume.
4. Source selection: Press SOURCE to cycle through connected inputs.
5. Preset programming: Hold PRESET button for 3 seconds while playing desired source.
6. Menu navigation: Use MENU and arrow buttons to access system settings.
7. Backlight control: Press any button to activate backlight (duration adjustable).

WARNING! Do not expose remote to direct sunlight or heat sources.

Multi-Zone Control

Control multiple audio zones independently or simultaneously.

1. Select zone: Press ZONE button to choose active zone (1-6).
2. Individual control: Adjust volume and source for selected zone only.
3. All zones: Press and hold ZONE for 3 seconds to control all zones simultaneously.
4. Zone grouping: Create custom zone groups through system menu.

Note: Zone functionality depends on Bose system configuration.

Care & Maintenance

Regular maintenance ensures optimal performance.

1. Battery replacement: Replace batteries when LED indicator flashes red.
2. Cleaning: Use soft, dry cloth only; no liquids or cleaning solutions.
3. Storage: Store in cool, dry place when not in use.
4. Button care: Avoid excessive force when pressing buttons.

CAUTION! Do not disassemble remote; no user-serviceable parts inside.

Regulatory Information

FCC Part 15: This device complies with Part 15 of FCC rules. Operation is subject to: (1) This device may not cause harmful interference, and (2) This device must accept any interference received. ICES-003: Complies with Canadian ICES-003. Copyright © Bose Corporation. All rights reserved. Bose and the Bose logo are registered trademarks of Bose Corporation. For support, visit www.bose.com/support or contact 1-800-999-2673.

Troubleshooting

Reset: Remove batteries, wait 60 seconds, reinstall batteries, re-pair with system.

Service: 1-800-999-2673; www.bose.com/support