Bose AWRC-10 Manual

The Bose AWRC-10 is a weather-resistant remote control designed for use with compatible Bose audio systems in outdoor or marine environments. It features a sealed, rugged construction to withstand moisture, UV exposure, and temperature variations. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to System 7. Operation 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Weather-resistant housing, Infrared (IR) transmitter, Control buttons, Battery compartment, Mounting bracket.

Feature	Description
Weather-resistant construction	Sealed against moisture, dust, and UV degradation
Infrared (IR) transmitter	For wireless control of compatible Bose systems
Control buttons	Power, Volume Up/Down, Source Select, Mute
Battery compartment	Holds two AAA batteries (included)
Mounting bracket	For secure installation on walls or surfaces
Operating range	Up to 30 feet (9 meters) line-of-sight
LED indicator	Confirms button press transmission
Compatible systems	Designed for Bose outdoor/marine audio systems
Temperature rating	Operates in typical outdoor temperature ranges
Material	UV-stabilized plastic and rubber seals

Installation

Unpack and inspect contents. Choose a suitable mounting location.

Select location: Choose a flat, stable surface within line-of-sight of the system's IR receiver.
Mount bracket: Use provided screws to attach mounting bracket to surface.
Attach remote: Snap remote control onto the mounted bracket.
Insert batteries: Open battery compartment, insert two AAA batteries observing polarity.

WARNING! Ensure mounting surface is secure. Do not install in areas with standing water or extreme direct heat.

First-Time Setup

Ensure compatible Bose system is powered on and in standby mode.

Power on system: Turn on your Bose audio system using its main power button.
Test remote: Point AWRC-10 at system's IR receiver, press POWER button. System should power on.
Verify functions: Test VOLUME UP/DOWN, SOURCE, and MUTE buttons for response.
Adjust aim: If response is weak, slightly adjust the angle of the remote.

CAUTION! Ensure battery compartment is fully sealed after inserting batteries.

Specifications

Model: AWRC-10 Weather-Resistant Remote Control.
Power Source: 2 x AAA batteries (included).
Battery Life: Approximately 12 months with typical use.
Transmission: Infrared (IR).
Range: Up to 30 feet (9 meters) line-of-sight.
Environmental Rating: Weather-resistant for outdoor/marine use.
Operating Temperature: -4°F to 140°F (-20°C to 60°C).
Dimensions: 5.1 x 1.8 x 0.9 inches (130 x 46 x 23 mm).
Weight: 3.5 oz (100 g) including batteries.
Compatibility: Bose outdoor and marine audio systems with IR receiver.

Controls and Settings

Front Panel Buttons: POWER, VOLUME UP, VOLUME DOWN, SOURCE, MUTE.

Functions: POWER turns system on/off. VOLUME adjusts audio level. SOURCE cycles through input sources (e.g., AUX, Bluetooth). MUTE toggles audio mute on/off.

No user-adjustable settings on the remote itself. All system settings are controlled via the main Bose unit or its primary remote.

Connecting to System

The AWRC-10 uses infrared communication; no physical connection to the audio system is required.

Ensure the Bose system is compatible and has an IR receiver window.
Point the front of the AWRC-10 directly at the system's IR receiver.
Press any button; the small LED on the remote will flash to confirm transmission.
There is no pairing or sync procedure required.

Tip: Avoid obstructions between the remote and the IR receiver. Sunlight or other strong IR sources can interfere.

Operation

Standard operation for controlling a Bose audio system.

Power: Press POWER to turn the system on from standby or off to standby.
Volume Control: Press VOLUME UP or VOLUME DOWN to adjust level.
Source Selection: Press SOURCE to cycle through available audio inputs.
Mute: Press MUTE to silence audio; press again or adjust volume to unmute.
Range: Operate within 30 feet with a clear line-of-sight.

WARNING! Do not submerge the remote in water. It is weather-resistant, not waterproof.

Maintenance

Clean with a soft, damp cloth. Do not use harsh chemicals or abrasives.

Battery Replacement: When LED becomes dim or buttons stop responding, replace both AAA batteries. Ensure compartment seal is clean and intact before closing.

CAUTION! Always replace both batteries at the same time. Remove batteries if the remote will not be used for an extended period.

Regulatory Information

FCC Part 15: This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. Copyright © Bose Corporation. Bose and the Bose logo are trademarks of Bose Corporation. For support, visit www.bose.com/support or contact Bose Customer Service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Remote does not work	Dead batteries, obstruction, out of range	Replace batteries; ensure clear line-of-sight; move within 30 feet.
Intermittent operation	Weak batteries, strong ambient light	Replace batteries; shield IR receiver from direct sunlight or other IR sources.
LED does not flash	Batteries installed incorrectly, depleted batteries	Check battery polarity; install new batteries.
Buttons feel sticky or unresponsive	Dirt/debris under buttons, seal compromised	Gently clean button area with a soft, damp cloth. Ensure seal is intact.
System does not respond to any button	System not in standby, incompatible system	Ensure main Bose unit is plugged in and in standby (power light on). Verify compatibility.

Reset: Remove batteries for 60 seconds, then reinstall.

Service: For product service, contact Bose Customer Support or visit www.bose.com/support.