Bose AV35 Set Up Manual

The Bose AV35 is a premium home theater speaker system designed to deliver immersive surround sound. This setup manual covers the complete installation, configuration, and optimization process for the Bose AV35 system, including the Acoustimass module, satellite speakers, center channel, and connectivity with your AV receiver. Below are key sections for unpacking, placement, wiring, receiver configuration, calibration, and troubleshooting to ensure optimal performance.

System Overview & Components

Key components included in the Bose AV35 system: Acoustimass bass module, Front Left/Right satellite speakers, Center channel speaker, Rear Left/Right surround speakers, Speaker cables, Connection cables, Remote control, and User manual.

Component	Description
Acoustimass Module	Handles low-frequency effects (bass)
Front Satellite Speakers	Deliver left and right front channel audio
Center Channel Speaker	Enhances dialogue and on-screen action
Rear Surround Speakers	Provide immersive surround sound effects
Speaker Cables	Color-coded for easy connection
Connection Cables	For linking module to AV receiver
Remote Control	For system power, volume, and input selection
Power Cord	For Acoustimass module power supply

Unpacking & Inspection

Carefully unpack all components and verify contents against the packing list.

1. Inspect each speaker and the Acoustimass module for any visible damage.
2. Check all cables for integrity and ensure connectors are undamaged.
3. Place components on a soft surface to prevent scratches during setup.
4. Keep packaging materials for possible future transport or service.

WARNING! The Acoustimass module is heavy; lift with your legs, not your back. Use assistance if needed.

Speaker Placement Guide

Optimal placement is critical for achieving the intended surround sound experience.

1. Front Speakers: Place left and right satellites at ear level, equidistant from the primary listening position, angled slightly inward.
2. Center Speaker: Position directly above or below your TV screen, centered horizontally.
3. Surround Speakers: Mount or place to the sides or slightly behind the listening area, at or slightly above ear level.
4. Acoustimass Module: Place along the front wall, away from corners for balanced bass, or in a corner for increased bass output.

CAUTION! Ensure all speakers are placed on stable surfaces or securely mounted to prevent falls.

Wiring & Connections

Connect all speakers to your AV receiver using the provided color-coded cables.

• Speaker Connections: Match cable colors to labeled terminals on the receiver (Front L/R, Center, Surround L/R).
• Acoustimass Module: Connect the module to the receiver's subwoofer/LFE output using the provided cable.
• Power: Plug the Acoustimass module into a standard 120V AC outlet.
• Cable Management: Route cables along walls or under carpets to minimize tripping hazards and maintain aesthetics.

Tip: Turn off and unplug your AV receiver before making any connections.

AV Receiver Configuration

Configure your AV receiver to properly recognize and drive the Bose AV35 system.

1. Power on the receiver and access the speaker setup menu.
2. Set all speaker sizes to "SMALL" to direct bass to the Acoustimass module.
3. Set the subwoofer/LFE channel to "YES" or "ON".
4. Configure crossover frequency to 80Hz (recommended starting point).
5. Run the receiver's auto-calibration routine (e.g., Audyssey, YPAO) if available, placing the included calibration microphone at the primary listening position.

System Calibration & Testing

After configuration, test each speaker channel and fine-tune settings.

1. Use the receiver's test tone feature to verify sound from each speaker.
2. Adjust individual channel levels (trim) so all speakers sound equally loud from the main listening position.
3. Play a familiar movie or music track to assess overall balance and immersion.
4. Fine-tune the Acoustimass module's volume using its control or the receiver's subwoofer level setting.

Note: Calibration results may vary with room acoustics; manual adjustments are often necessary.

Remote Control & System Settings

The included remote controls basic system functions.

Button	Function
POWER	Turns system on/standby
VOL +/-	Master volume control
MUTE	Instantly mutes all audio
INPUT SELECT	Cycles through AV receiver inputs
SOUND MODE	Selects preset sound profiles (Movie, Music, Direct)

System Settings: Access via your AV receiver's menu for advanced adjustments like delay (distance), equalization, and dynamic range compression.

Optimizing Sound Performance

Tips to get the best sound from your Bose AV35 system.

• Room Acoustics: Add rugs, curtains, or upholstered furniture to reduce harsh reflections.
• Bass Management: Experiment with Acoustimass module placement to find the optimal bass response for your room.
• Content Selection: Use high-quality source material (Blu-ray, lossless audio) to experience the system's full capabilities.
• Regular Updates: Check for firmware updates for your AV receiver that may improve compatibility or performance.

Care & Maintenance

Proper care ensures long-term performance and reliability.

1. Dust speakers regularly with a soft, dry, lint-free cloth.
2. Do not use liquids, solvents, or abrasive cleaners on any speaker surfaces.
3. Protect the system from extreme temperatures, humidity, and direct sunlight.
4. Check cable connections periodically to ensure they are secure and corrosion-free.

CAUTION! Never attempt to open or service any speaker component. Refer all servicing to qualified personnel.

Regulatory & Safety Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that it does not cause harmful interference. This equipment has been tested and found to comply with the limits for a Class B digital device. Any changes or modifications not expressly approved by Bose Corporation could void the user's authority to operate the equipment. For customer service in the USA and Canada, call 1-800-999-2673 or visit www.bose.com.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No sound from any speaker	Receiver off/incorrect input	Ensure receiver is on and correct input source is selected.
No sound from one speaker	Loose/bad connection	Check cable connections at both receiver and speaker. Swap cables to isolate issue.
No bass from Acoustimass module	Cable/Setting/ Power	Check LFE/sub cable; verify receiver subwoofer setting is ON; ensure module is powered.
Distorted sound	Overdriven/ clipping	Reduce receiver volume level. Check speaker wires for shorts.
Hum or buzz	Ground loop/ interference	Ensure all components are plugged into the same power circuit. Use high-quality shielded cables.
Remote not working	Batteries/ Obstruction	Replace batteries. Ensure clear line-of-sight to the AV receiver's IR sensor.

Reset: Power cycle the system (turn off and unplug receiver and module for 60 seconds).

Service: 1-800-999-2673; www.bose.com/support