Bose AM FM Radio Manual

The Bose AM FM Radio is a high-fidelity audio device featuring AM/FM tuner with digital presets, advanced speaker technology for clear sound, alarm clock functions, sleep timer, auxiliary input for external audio sources, and headphone jack for private listening. Powered by AC adapter or optional battery pack. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Using Radio Functions 8. Alarm & Timer Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main unit with integrated speakers, Remote Control, Power adapter port, Auxiliary input jack, Headphone jack, AM/FM antenna terminals.

FeatureDescription
AM/FM TunerDigital tuning with 20 station presets (10 AM, 10 FM)
Auxiliary Input3.5mm stereo jack for connecting external audio devices
Headphone Jack3.5mm output for private listening
AC Power InputFor main power connection
Battery CompartmentOptional battery operation (requires 4 D-cell batteries)
Alarm FunctionsDual alarm with radio or buzzer option
SLEEP TimerAuto power-off after 15-90 minutes
MUTEMutes sound temporarily
POWERTurns radio on/off
PRESET ButtonsDirect access to saved stations

Installation

Unpack and inspect contents. Place on stable, level surface.

  1. Connect power: Plug AC adapter into wall outlet and radio's DC input.
  2. Extend antennas: Fully extend FM wire antenna; position AM loop antenna for best reception.
  3. Connect audio sources: Use auxiliary input for MP3 players, smartphones, or other audio devices.
  4. Insert batteries (optional): For portable use, install 4 D-cell batteries.

WARNING! Do not place near heat sources or in direct sunlight. Ensure proper ventilation around unit.

First-Time Setup

Power on radio; follow initial setup procedure.

  1. Set time: Press CLOCK button, use HOUR/MINUTE buttons to set current time.
  2. Program stations: Tune to desired station, press and hold PRESET button (1-10) for 3 seconds.
  3. Adjust sound: Use BASS and TREBLE controls to customize audio profile.
  4. Set alarms: Press ALARM button to configure alarm time and source (radio/buzzer).

CAUTION! Use only recommended power adapter. Incorrect voltage may damage unit.

Specifications

Controls and Settings

Front Panel: POWER, VOLUME, BASS, TREBLE, BAND (AM/FM), TUNING, PRESET (1-10), CLOCK, ALARM, SLEEP.

Remote: POWER, VOLUME, MUTE, BAND, PRESET, SLEEP, SNOOZE, ALARM SET.

Tuning: Manual tuning with TUNING buttons; auto-scan with SCAN button. Audio: BASS (-10 to +10), TREBLE (-10 to +10), loudness compensation. Clock: 12/24 hour format, daylight saving adjustment. Alarm: Dual alarms (ALARM1, ALARM2) with radio or buzzer selection, adjustable volume. Sleep: 15, 30, 45, 60, 90 minute options.

Connecting Devices

Auxiliary Input: Connect external audio source using 3.5mm stereo cable. Headphones: Plug into headphone jack for private listening.

  1. Ensure radio is powered off before connecting devices.
  2. Connect audio cable from device's headphone/output jack to radio's AUX IN.
  3. Select AUX mode using INPUT/SOURCE button.
  4. Adjust volume on both devices for optimal sound.

Tip: For best audio quality, use shielded audio cables and keep away from power cords.

Using Radio Functions

Supports AM and FM broadcasting with preset memory.

  1. Select band: Press BAND to toggle between AM and FM.
  2. Tune stations: Use TUNING buttons or SCAN for automatic station search.
  3. Save presets: Tune to station, press and hold PRESET button (1-10) for 3 seconds.
  4. Recall presets: Press corresponding PRESET button for instant station access.
  5. Adjust reception: Reposition antennas for optimal signal strength.
  6. Use sleep timer: Press SLEEP repeatedly to select duration (15-90 min).
  7. Mute audio: Press MUTE to temporarily silence sound; press again to restore.

WARNING! Do not touch antennas during electrical storms. Disconnect power during severe weather.

Alarm & Timer Features

Dual Alarms: Set separate times for ALARM1 and ALARM2. Each can be set to radio (at specified volume and station) or buzzer. Snooze: 9-minute snooze function. Sleep Timer: Auto power-off after selected duration.

Care & Cleaning

Unplug before cleaning. Use soft, dry cloth for exterior. For stubborn stains, dampen cloth with water only; never use solvents.

CAUTION! Do not allow moisture to enter ventilation slots or controls. Keep away from liquids.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Bose Corporation. All rights reserved. For support, visit www.bose.com/support or contact 1-800-999-2673. This device complies with Part 15 of FCC Rules. Operation is subject to interference that may cause undesired operation.

Troubleshooting

SymptomPossible CauseCorrective Action
No powerPower connectionCheck AC adapter connection; ensure outlet is working; replace batteries if using battery power.
Poor radio receptionAntenna positionExtend FM antenna fully; rotate AM antenna; reposition radio near window.
No sound from aux inputConnection/settingsEnsure cable is fully inserted; select AUX mode; check volume on source device.
Alarm not soundingSettings/powerVerify alarm is enabled; check alarm source (radio/buzzer); ensure unit has power.
Display dim or blankPower/brightnessCheck power connection; adjust display brightness in settings if available.
Remote not workingBatteries/obstructionReplace remote batteries; ensure clear path to IR sensor; operate within 20 feet.

Reset: Unplug for 2 minutes to reset microprocessor if unit becomes unresponsive.

Service: 1-800-999-2673; www.bose.com/support

Bose AM FM Radio Manual © - All Rights Reserved 2025