Bose AM 6 Manual

The Bose AM 6 is a high-performance, acoustically matched speaker system designed for home theater and audio applications. It features compact satellite speakers, a powerful Acoustimass module for deep bass, and proprietary Bose technologies for clear, spacious sound. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Connections 6. Connecting to Audio/Video Sources 7. Operation and Sound Adjustment 8. Care & Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Acoustimass module (bass), 5 compact satellite speakers, speaker cables, connection cables, remote control (if applicable).

Feature	Description
Acoustimass Module	Handles low-frequency sounds; connects to satellites
Satellite Speakers	Compact design for mid/high frequencies; wall-mountable
Proprietary Technology	Delivers clear, spacious sound from small enclosures
Speaker Connections	Color-coded cables for easy setup (Red/Black terminals)
Input Options	Accepts line-level or speaker-level inputs from receiver/amp
Power Requirements	Powered by connected audio receiver/amplifier

Installation

Unpack and inspect all components. Choose optimal speaker placement.

Position Acoustimass module: Place near wall or corner (not enclosed).
Mount satellites: Install on walls, shelves, or stands at ear level.
Connect satellites to module: Use provided cables; match colors (red to red, black to black).
Connect module to receiver: Use speaker wire from receiver's front/center/surround outputs to module inputs.
Secure all connections.

WARNING! Ensure receiver/amp is off during connections. Do not place module in enclosed cabinet.

First-Time Setup

Power on audio receiver; configure settings.

Set receiver speaker size: Set front/center/surround to "Small" if available.
Set crossover: Configure receiver crossover to 80-120 Hz (or as recommended).
Test sound: Play audio source; ensure all satellites and bass are working.
Adjust levels: Use receiver's test tone to balance speaker volumes.

CAUTION! Do not overpower speakers; keep volume moderate initially.

Specifications

System Type: 5.1 channel home theater speaker system.
Satellite Speakers: Full-range drivers, magnetically shielded.
Acoustimass Module:Frequency response tailored for bass reinforcement. Impedance:Compatible with 4-8 ohm receivers/amplifiers. Power Handling:Dependent on connected amplifier; follow amp guidelines. Dimensions (Satellites):Compact size for flexible placement. Finish:Black or white matte (model dependent).

Controls and Connections

System controlled via connected audio receiver/amplifier. Module may have input level adjustment.

Receiver Controls: Volume, balance, tone, crossover, delay settings.

Module Connections: Input terminals (from receiver), output terminals (to satellites). Ensure tight connections; avoid stray wire strands.

Connecting to Audio/Video Sources

Connect to AV receiver, stereo amplifier, or compatible source.

Turn off all equipment before connecting.

Connect receiver front L/R outputs to module inputs (if using speaker-level).

For line-level: Use RCA cables from receiver subwoofer/pre-out to module.

Connect satellites to module outputs.

Power on receiver; select source.

Tip: Use high-quality speaker wire for best performance.

Operation and Sound Adjustment

Optimize sound via receiver settings and placement.

Balance: Use receiver test tone to set equal volume from all satellites.

Bass level: Adjust module level or receiver subwoofer output to blend with satellites.

Placement: Experiment with satellite angles for best imaging.

Crossover: Set receiver crossover to recommended frequency (e.g., 100 Hz).

Room correction: Use receiver's auto-setup if available.

WARNING! Avoid extreme volume levels to prevent distortion/damage.

Care & Maintenance

Dust satellites with soft, dry cloth. Do not use liquids or abrasive cleaners.

CAUTION! Keep module vents clear; ensure proper ventilation. Do not open speaker enclosures.

Regulatory Information

Complies with applicable FCC regulations. Bose and Acoustimass are trademarks of Bose Corporation. For support, visit www.bose.com or contact Bose customer service.

Troubleshooting

Symptom Possible Cause Corrective Action

No sound from satellites Loose connections Check all wire connections; ensure receiver is on and set correctly.

Weak or no bass Module not powered/connected Verify module connections; check receiver subwoofer settings.

Distorted sound Overdriven/incorrect settings Reduce volume; check receiver speaker size/crossover settings.

Hum or buzz Ground loop/interference Ensure all connections secure; try different power outlet.

One satellite silent Faulty cable/channel Swap cables to test; check receiver balance settings.

Reset: Power cycle receiver and re-check settings.

Service: Contact Bose customer support for assistance.

Bose AM 6 Manual © - All Rights Reserved 2025

Symptom	Possible Cause	Corrective Action
No sound from satellites	Loose connections	Check all wire connections; ensure receiver is on and set correctly.
Weak or no bass	Module not powered/connected	Verify module connections; check receiver subwoofer settings.
Distorted sound	Overdriven/incorrect settings	Reduce volume; check receiver speaker size/crossover settings.
Hum or buzz	Ground loop/interference	Ensure all connections secure; try different power outlet.
One satellite silent	Faulty cable/channel	Swap cables to test; check receiver balance settings.