Bose Acoustamas 10 Series 4 Manual

The Bose Acoustamas 10 Series 4 is a premium home theater speaker system featuring direct/reflecting speaker technology, an Acoustamas bass module, a control console with AM/FM tuner, and compatibility with various audio/video sources. It delivers immersive surround sound for movies, music, and TV. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Two direct/reflecting cube speaker arrays, Acoustamas bass module, Control console with display, Remote control, AM/FM antenna inputs, Audio/video input jacks.

Installation

Unpack and inspect all components. Choose a stable location near your TV and audio sources.

1. Place Speakers: Position cube arrays on stands or mount on walls at ear level, spaced apart.
2. Place Bass Module: Position near a wall or corner for enhanced bass response.
3. Place Control Console: Position within reach of cables and with clear line of sight for remote.
4. Connect Speakers: Use supplied cables to connect cube arrays and bass module to control console.
5. Connect Power: Plug control console and bass module into AC outlets.

WARNING! Bass module is heavy; lift with care. Ensure all connections are secure before powering on.

First-Time Setup

Power on the system; follow initial setup prompts if available.

1. Connect Antennas: Attach supplied AM loop and FM wire antennas to control console.
2. Connect Audio Sources: Use audio cables to connect CD player, TV, etc., to appropriate inputs.
3. Set Input Source: Press INPUT on remote or console to select desired source (e.g., CD, AUX).
4. Adjust Volume: Start at low volume and increase to comfortable level.
5. Tuner Setup: For FM, extend antenna fully; for AM, rotate loop for best reception.

CAUTION! Keep system away from heat sources and moisture. Allow ventilation around components.

Specifications

• Speaker System: 2 direct/reflecting cube arrays + Acoustamas bass module.
• Total System Power: [Power rating, e.g., 200 watts total].
• Frequency Response: [e.g., 35Hz - 20kHz].
• Inputs: Audio (CD, AUX), Video, AM/FM antenna.
• Outputs: Headphone jack.
• Tuner: AM/FM with preset memory.
• Remote Control: Infrared, battery-operated.
• Power Source: 120V AC, 60Hz.
• Dimensions: Bass module: [Dimensions]; Cube arrays: [Dimensions]; Console: [Dimensions].

Controls and Settings

Control Console: POWER, INPUT SELECTOR, VOLUME, TUNER BAND (AM/FM), TUNING, PRESET buttons.

Remote: POWER, INPUT SELECT, VOLUME UP/DOWN, MUTE, TUNER BAND, PRESET 1-6, TUNING UP/DOWN, numeric buttons for direct tuning.

Audio Settings: Balance (adjust left/right), Tone (bass/treble). Tuner Settings: Manual tuning, preset storage (store up to 6 AM and 6 FM stations). System: Reset to factory defaults if needed.

Connecting Devices

Audio Sources: Use RCA audio cables to connect CD player, tape deck, etc., to CD or AUX inputs. TV/VCR: Connect audio outputs from TV or VCR to AUX input. Video Source: Connect composite video cable to VIDEO INPUT if available.

1. Turn off system and source device before connecting.
2. Match cable colors (red/white for audio, yellow for video).
3. Select corresponding input on control console (e.g., press INPUT until "CD" displays).

Tip: Use high-quality cables for best audio performance. Keep cables organized to avoid interference.

System Operation

Playing Audio Sources:

1. Power: Press POWER on console or remote.
2. Select Input: Press INPUT to cycle through sources (CD, AUX, etc.).
3. Control Playback: Use your source device (CD player) to play, pause, skip tracks.
4. Adjust Volume: Use VOLUME buttons on remote or console.
5. Mute: Press MUTE to silence audio; press again to restore.
6. Headphones: Plug into headphone jack on console for private listening (mutes speakers).

WARNING! Do not operate at extremely high volume for extended periods to avoid hearing damage or speaker damage.

Tuner Operation

Listening to AM/FM Radio:

1. Select Tuner: Press INPUT until "TUNER" displays.
2. Select Band: Press BAND to switch between AM and FM.
3. Tune: Press TUNING up/down to manually seek stations.
4. Store Presets: Tune to desired station, press and hold a PRESET button (1-6) until display confirms.
5. Recall Preset: Press the corresponding PRESET button.
6. Fine Tune: For FM, ensure antenna is fully extended and positioned for best reception.

Note: FM reception may require adjusting antenna position. AM may be susceptible to interference from electronic devices.

Care & Cleaning

Unplug system before cleaning. Use a soft, dry cloth to wipe exterior surfaces. For stubborn marks, lightly dampen cloth with water; do not use solvents or abrasives.

CAUTION! Do not allow liquids to enter any openings. Do not use aerosol sprays near the speakers or console.

Regulatory Information

FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to interference that may cause undesired operation. Copyright © [Year] Bose Corporation. All rights reserved. Bose, Acoustamas, and the Bose logo are trademarks of Bose Corporation. For support, visit www.bose.com or contact Bose Customer Service.

Troubleshooting

Reset: Unplug system for 60 seconds, then reconnect power.

Service: For technical support, contact Bose Customer Service or visit www.bose.com.