Bose Acoustimass Series 3 Manual

The Bose Acoustimass Series 3 is a compact speaker system designed to deliver high-quality audio with minimal space requirements. It features proprietary Bose technologies for clear, spacious sound, includes a bass module and satellite speakers, supports various audio inputs, and comes with a remote control. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Acoustimass bass module, two satellite speakers, remote control, power cord, audio cables.

Installation

Unpack and inspect all components. Place on stable surfaces.

1. Position speakers: Place bass module near wall; satellites at ear level, spaced apart.
2. Connect speakers: Use provided cables to connect satellites to bass module terminals.
3. Connect audio source: Use RCA or 3.5mm cable to connect to audio input on bass module.
4. Plug into AC power.

WARNING! Ensure proper ventilation; do not block bass module ports. Handle speakers with care.

First-Time Setup

Power on system; follow initial setup steps.

1. Power connection: Plug bass module into AC outlet; indicator light should turn on.
2. Speaker placement: Adjust satellite positions for optimal stereo imaging.
3. Audio source selection: Use INPUT SELECT to choose connected source.
4. Volume adjustment: Set initial volume to low level; adjust as needed.

CAUTION! Avoid placing speakers near heat sources or in direct sunlight.

Specifications

• System Type: 2.1 channel speaker system.
• Bass Module: Proprietary Acoustimass technology.
• Satellites: Full-range drivers.
• Inputs: RCA stereo, 3.5mm stereo.
• Power Output: Amplified bass module.
• Remote Control: Infrared, battery-operated.
• Power Source: 120V AC, 60Hz.
• Dimensions: Compact design for space-saving placement.

Controls and Settings

Front Panel: POWER button, status light. Remote: POWER, VOLUME UP/DOWN, INPUT SELECT.

Operation: Press POWER to turn on/off; use remote for volume control; press INPUT SELECT to switch between audio sources.

No user-adjustable equalization; sound is optimized by Bose design.

Connecting Devices

Audio Sources: CD player, TV, computer, smartphone.

1. Turn off system and audio source before connecting.
2. Use appropriate cable (RCA or 3.5mm) to connect source output to bass module input.
3. Ensure connections are secure.
4. Power on system and source; select correct input.

Tip: For best performance, use high-quality audio cables and keep cable runs short.

Operation

Daily use procedures.

1. Power on: Press POWER on bass module or remote.
2. Select source: Use INPUT SELECT to choose connected audio device.
3. Adjust volume: Use remote VOLUME buttons.
4. Power off: Press POWER to turn system off; indicator light turns off.

WARNING! Do not operate at extremely high volume levels for extended periods to prevent damage.

Care & Cleaning

Unplug system before cleaning. Use soft, dry cloth for exterior surfaces.

CAUTION! Do not use liquids or abrasive cleaners. Keep speakers away from moisture.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Bose Corporation. For support, visit www.bose.com or contact Bose customer service.

Troubleshooting

Reset: Unplug system for 60 seconds, then reconnect power.

Service: Contact Bose customer support for service inquiries.