Bose Acoustimass 2.1 Manual

The Bose Acoustimass 2.1 is a compact, high-performance speaker system featuring a powerful subwoofer and two satellite speakers. Designed for home theater and music listening, it delivers clear, room-filling sound with deep bass. The system includes a subwoofer with built-in amplifier, two satellite speakers, connecting cables, and a remote control. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Acoustimass subwoofer with amplifier, two satellite speakers, remote control, connecting cables, power cord.

Installation

Unpack and inspect all components. Choose a stable location for subwoofer and speakers.

1. Place subwoofer: Position on floor near wall for enhanced bass.
2. Place satellite speakers: Mount on walls or place on shelves at ear level.
3. Connect speakers: Use provided cables to connect satellites to subwoofer terminals.
4. Connect audio source: Use RCA cables to connect TV, receiver, or music player to subwoofer inputs.
5. Plug into AC power.

WARNING! Ensure proper ventilation for subwoofer; do not block vents. Handle speakers with care.

First-Time Setup

Power on system; follow initial setup steps.

1. Power connection: Plug subwoofer into AC outlet; power LED should illuminate.
2. Speaker connection: Ensure satellite speakers are properly connected to correct terminals.
3. Source connection: Connect audio source (e.g., TV) to subwoofer RCA inputs.
4. Adjust volume: Set initial volume to low level; play audio to test.
5. Adjust bass: Use bass control to set desired low-frequency level.

CAUTION! Avoid placing speakers near heat sources or moisture.

Specifications

• System Type: 2.1 channel speaker system.
• Subwoofer: Built-in amplifier, bass reflex design.
• Satellite Speakers: Full-range drivers, magnetic shielding.
• Power Output: [Specify wattage if available]
• Frequency Response: [Specify range if available]
• Inputs: RCA stereo audio inputs.
• Controls: Volume, bass, power.
• Power Source: 120V AC, 60Hz.
• Dimensions: Compact design for easy placement.

Controls and Settings

Controls located on subwoofer and remote. Subwoofer: POWER, VOLUME, BASS. Remote: POWER, VOLUME UP/DOWN.

Remote: POWER, VOLUME UP, VOLUME DOWN.

Volume: Adjust overall sound level. Bass: Adjust subwoofer output (turn clockwise for more bass). Power: Turns system on/off; auto standby activates after no signal.

Connecting Devices

Audio Sources: TV, stereo receiver, CD/DVD player, computer.

1. Turn off audio source and speaker system before connecting.
2. Use RCA cables: Connect source audio outputs to subwoofer RCA inputs.
3. For TV: Use audio output (RCA or headphone) to subwoofer.
4. For computer: Use 3.5mm to RCA adapter if needed.

Tip: Ensure cables are firmly connected; avoid bending cables sharply.

Operation

For daily use with various audio sources.

1. Power on: Press POWER on subwoofer or remote.
2. Select source: Ensure audio source is playing.
3. Adjust volume: Use VOLUME control on subwoofer or remote.
4. Adjust bass: Use BASS control to suit room acoustics and preference.
5. Power off: Press POWER to turn off; system may enter auto standby.

WARNING! Do not operate at extremely high volumes for extended periods to avoid damage.

Accessibility Features

Remote control allows easy access to volume and power functions. Clear labeling on controls for ease of use.

Care & Cleaning

Unplug system before cleaning. Use soft, dry cloth for speakers and subwoofer; avoid liquids.

CAUTION! Do not use abrasive cleaners; keep away from water and dust.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Bose Corporation; trademarks owned by Bose Corporation. For support, visit www.bose.com or contact customer service.

Troubleshooting

Reset: Unplug system for 30 seconds, then reconnect.

Service: Contact Bose customer support; www.bose.com