Bose Acoustimass 10 V Manual

The Bose Acoustimass 10 V is a premium home theater speaker system designed to deliver immersive, high-fidelity audio. It consists of five Direct/Reflecting cube speakers and an Acoustimass module (bass unit) to reproduce deep, powerful low frequencies without localization. This manual covers safety, setup, connection, operation, and troubleshooting for optimal performance.

1. Features at a Glance 2. Installation & Placement 3. First-Time Setup 4. Specifications 5. Controls and Connections 6. Connecting to Audio/Video Receivers 7. Operation & Sound Adjustment 8. Care & Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Five Direct/Reflecting cube speakers, one Acoustimass module, speaker cables, and mounting hardware.

Feature	Description
Direct/Reflecting cube speakers	Provide wide, spacious soundstage for realistic audio imaging
Acoustimass module	Handles low frequencies; can be placed out of sight without sacrificing bass quality
Magnetic shielding	Allows placement near TVs and monitors without interference
Speaker terminals	Color-coded and labeled for easy connection (Front L/R, Center, Surround L/R)
Wall-mount capability	Includes brackets for flexible placement of cube speakers
High power handling	Compatible with most home theater receivers (10-200 watts per channel recommended)
Low-frequency control	Adjustable bass level via module control or receiver settings

Installation & Placement

Unpack and inspect all components. Plan speaker placement for optimal sound.

Place cube speakers: Front left/right at ear level, angled toward listening area. Center speaker above/below TV. Surround speakers to sides or slightly behind listening position.
Place Acoustimass module: Can be located along a wall, in a corner, or concealed (not in enclosed cabinet). Ensure at least 6 inches clearance from walls.
Connect speaker wires: Use provided cables; match colors/letters to terminals on module and speakers.
Connect to receiver: Use standard speaker wire from module outputs to corresponding receiver channels.

WARNING! Speakers are heavy; use care when mounting. Ensure secure connections to avoid shorts.

First-Time Setup

Power on your audio/video receiver; configure speaker settings.

Set receiver speaker size: Set all channels to "Small" (common setting to route bass to Acoustimass module).
Set crossover: Typically 80-100 Hz; adjust based on room acoustics.
Run auto-calibration: If receiver has room correction (e.g., Audyssey), follow its instructions.
Test each speaker: Use receiver's test tone to ensure all channels are working.
Adjust bass level: Use module control or receiver's bass management for desired low-frequency impact.

CAUTION! Do not connect speakers directly to wall outlet or high-voltage sources.

Specifications

Speaker Type: 5 Direct/Reflecting cube speakers + 1 Acoustimass module.
Driver Size: Cubes: Custom full-range; Module: Dual bass drivers.
Frequency Response: Module: Below 200 Hz; System: Full range with proper crossover.
Impedance: 4-8 ohms per channel (compatible with most receivers).
Power Handling: Recommended amplifier power: 10-200 watts per channel.
Magnetic Shielding: Yes, for all cube speakers.
Dimensions (each cube): Approximately 4" H x 4" W x 4" D.
Module Dimensions: Approximately 20" H x 10" W x 10" D.
Weight: Module: ~25 lbs; Each cube: ~2 lbs.

Controls and Connections

Primary control via your audio/video receiver. Acoustimass module may have a bass level control knob.

Module Connections: Labeled terminals for Front Left/Right, Center, Surround Left/Right inputs (from receiver) and corresponding outputs to cube speakers.

Receiver Settings: Volume, balance, tone controls, crossover, delay/distance, channel levels.

Note: No standalone power switch on speakers; they are powered by your receiver.

Connecting to Audio/Video Receivers

Use standard speaker wire (16-18 gauge recommended).

Turn off and unplug receiver.
Connect receiver's front left/right, center, and surround outputs to corresponding INPUT terminals on Acoustimass module.
Connect cube speakers to OUTPUT terminals on module using provided cables (match colors/letters).
Ensure positive/negative polarity is maintained (usually marked +/– or color-coded).
Plug in and power on receiver.

Tip: Keep speaker wires away from power cables to reduce interference.

Operation & Sound Adjustment

Once connected, operate system via your receiver's remote.

Select source: Choose Blu-ray, streaming, TV, etc., on receiver.
Adjust volume: Use receiver's volume control.
Select sound mode: Choose stereo, Dolby Digital, DTS, etc., based on content.
Fine-tune bass: Adjust module's bass control (if present) or receiver's subwoofer level.
Balance channels: Use receiver's test tone and level adjustments to ensure consistent volume from all speakers.

WARNING! Avoid excessive volume to prevent speaker damage and hearing loss.

Care & Maintenance

Unplug receiver before cleaning. Use dry, soft cloth for cube speakers and module. Do not use liquids or abrasive cleaners.

CAUTION! Do not place liquids on or near speakers. Protect from extreme temperatures and moisture.

Regulatory Information

Complies with applicable FCC regulations for home use. Copyright © Bose Corporation. All trademarks are property of Bose Corporation. For support, visit www.bose.com or contact Bose Customer Service at 1-800-999-2673.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No sound from one or more speakers	Loose or incorrect wiring	Check connections at module and receiver; ensure wires are secure and polarity correct.
Weak or no bass	Receiver settings, module placement	Set receiver speaker size to "Small"; ensure crossover is set; verify module is powered and connected.
Distorted sound	Overdriven amplifier, damaged wire	Reduce volume; check for frayed wires or shorts.
Hum or buzz	Ground loop, interference	Ensure all components plug into same AC circuit; separate audio and power cables.
Speaker crackles	Dirty connections	Unplug and clean speaker terminals; reconnect securely.

Reset: Power cycle receiver and check settings.

Service: 1-800-999-2673; www.bose.com