Bose Acoustic Wave II CD Changer Manual

The Bose Acoustic Wave II CD Changer is a premium audio system featuring a 6-disc CD changer, integrated Acoustic Wave music system with waveguide speaker technology, AM/FM tuner, remote control, and auxiliary input. It delivers room-filling sound from a compact enclosure. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Playing CDs 8. Radio Operation 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Acoustic Wave music system with waveguide, 6-disc CD changer, AM/FM tuner, Remote Control, Auxiliary input, Headphone jack.

FeatureDescription
6-disc CD changerLoad and play up to six CDs sequentially or randomly
Acoustic Wave waveguidePatented technology for full, natural sound from compact enclosure
AM/FM tunerPreset up to 30 stations (15 AM, 15 FM)
Auxiliary inputConnect external audio sources (e.g., MP3 player)
Headphone jackFor private listening (3.5mm)
Remote controlFull-function remote for all operations
Power cordDetachable AC power cord
Disc trayFront-loading tray for easy disc access
DisplayBacklit LCD for track, time, and station information
Volume controlRotary knob on unit and buttons on remote

Installation

Unpack and inspect contents. Place on stable, level surface away from heat sources.

  1. Connect power: Plug detachable power cord into rear of unit and into AC outlet.
  2. Connect antenna: Attach AM loop antenna and FM wire antenna for radio reception.
  3. Connect auxiliary device: Use 3.5mm to RCA cable to connect external source to AUX IN.
  4. Position system: Allow at least 4 inches of clearance on all sides for proper ventilation.

WARNING! Do not place near heat registers, radiators, or in direct sunlight. Ensure proper ventilation to prevent overheating.

First-Time Setup

Power on system; initialize CD changer and set up radio presets.

  1. Initialize CD changer: Press POWER, open disc tray with OPEN/CLOSE, load CDs if desired.
  2. Set radio presets: Tune to desired station, press and hold PRESET button (1-30) for 2 seconds.
  3. Adjust tone: Use BASS and TREBLE controls on remote for preferred sound.
  4. Set clock: Press CLOCK button, use number keys to enter time, press ENTER.

CAUTION! Handle CDs by edges only. Do not touch laser lens.

Specifications

Controls and Settings

Front Panel: POWER, OPEN/CLOSE, VOLUME knob, HEADPHONE jack, DISPLAY.

Remote: POWER, Numeric buttons (0-9), OPEN/CLOSE, PLAY, PAUSE, STOP, SKIP (PREV/NEXT), AM/FM, PRESET, CLOCK, BASS, TREBLE, MUTE, DISPLAY.

CD Functions: PLAY, PAUSE, STOP, SKIP, RANDOM, REPEAT, PROGRAM. Radio: TUNE UP/DOWN, PRESET STORE/RECALL, AUTO-SCAN. Tone: Adjust BASS and TREBLE (-10 to +10). Display: Shows track number, elapsed time, radio frequency, clock.

Connecting Devices

Auxiliary Input: Connect MP3 player, smartphone, or tablet via 3.5mm to RCA cable.

  1. Turn off system before connecting.
  2. Connect cable from device's headphone jack to AUX IN (red/white RCA) on rear.
  3. Select AUX input by pressing AUX button on remote.
  4. Adjust volume on both device and system for optimal level.

Tip: For best sound quality, set connected device's volume to 75% and adjust with system's volume control.

Playing CDs

Supports audio CDs, CD-R, CD-RW.

  1. Load discs: Press OPEN/CLOSE, place up to 6 discs in tray label-side up.
  2. Play: Press PLAY; system begins with disc 1, track 1.
  3. Skip tracks: Press NEXT or PREV to advance or go back.
  4. Random play: Press RANDOM to play tracks from all loaded discs in random order.
  5. Repeat: Press REPEAT to repeat current track, disc, or all discs.
  6. Program play: Press PROGRAM to create custom play sequence of up to 32 tracks.
  7. Pause: Press PAUSE to temporarily halt playback; press again to resume.
  8. Stop: Press STOP; system remembers position if stopped during play.

WARNING! Do not move system while discs are playing. Keep discs clean and free of scratches.

Radio Operation

AM/FM tuner with 30 presets.

  1. Select band: Press AM/FM button to toggle between AM and FM.
  2. Tune manually: Press TUNE UP/DOWN to search.
  3. Auto-scan: Press and hold TUNE UP/DOWN to scan for stations with strong signal.
  4. Store presets: Tune to station, press and hold desired PRESET number (1-30) for 2 seconds.
  5. Recall preset: Press PRESET, then number of stored station.

Note: For best FM reception, fully extend wire antenna and position vertically. For AM, rotate loop antenna for clearest signal.

Care & Cleaning

Unplug before cleaning. Use soft, dry cloth for exterior. Clean CD lens only with approved CD lens cleaner.

CAUTION! Do not use solvents, abrasives, or aerosol cleaners. Never spray liquids directly on unit.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Bose Corporation. Patents issued and pending. For support, visit www.bose.com or contact Bose Customer Service at 1-800-999-2673.

Troubleshooting

SymptomPossible CauseCorrective Action
No powerPower cord not connectedEnsure power cord is firmly plugged into unit and outlet.
Disc won't playDisc dirty/damagedClean disc with soft cloth; check for scratches.
Poor radio receptionAntenna not positionedReposition FM wire antenna; rotate AM loop antenna.
Remote not workingBatteries/obstructionReplace batteries; ensure clear path to IR sensor on front.
No sound from AUXInput selection/volumePress AUX button; check volume on both device and system.
Distorted soundSource quality/connectionsCheck disc for damage; ensure all connections are secure.

Reset: Unplug unit for 60 seconds, then reconnect to reset microprocessor.

Service: 1-800-999-2673; www.bose.com

Bose Acoustic Wave II CD Changer Manual © - All Rights Reserved 2025