Bose Acoustic Wave 2 Manual

The Bose Acoustic Wave 2 is a premium music system featuring waveguide speaker technology, CD player, AM/FM tuner, auxiliary input, and remote control. It delivers room-filling sound from a compact unit with simplified controls, preset stations, alarm functions, and tone adjustments. Below are key sections for safety, features, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Playing CDs 8. Radio Operation 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Acoustic waveguide speaker, CD player, AM/FM tuner, Remote Control, Auxiliary input, Headphone jack, Power cord.

FeatureDescription
Acoustic waveguidePatented technology for full, natural sound
CD playerPlays audio CDs and CD-R/RW discs
AM/FM tuner30 station presets (15 AM, 15 FM)
Auxiliary inputFor connecting external audio sources
Headphone jackFor private listening
Remote controlFull-function infrared remote
Alarm functionsDual alarms with CD or radio wake-up
Bass/Treble controlsAdjustable tone settings
Sleep timerAutomatic shut-off (15-90 minutes)
PowerTurns system on/off

Installation

Unpack and inspect contents. Place on stable surface away from heat sources.

  1. Position system: Place on level surface with at least 4 inches clearance on all sides.
  2. Connect power: Plug power cord into AC outlet (120V, 60Hz).
  3. Connect antenna: Attach AM loop antenna and FM wire antenna.
  4. Connect auxiliary devices: Use 3.5mm cable to connect to AUX IN jack.

WARNING! Do not place near heat sources or in direct sunlight. Ensure proper ventilation.

First-Time Setup

Power on system; follow initial setup procedure.

  1. Set time: Press and hold CLOCK button, use HOUR/MINUTE buttons to set.
  2. Program radio stations: Tune to station, press and hold preset button (1-15).
  3. Set alarms: Press ALARM button, select alarm 1 or 2, set time and source (CD/Radio).
  4. Adjust tone: Use BASS and TREBLE buttons to customize sound.

CAUTION! Handle with care; avoid dropping or impacting the unit.

Specifications

Controls and Settings

Front Panel: POWER, CD OPEN/CLOSE, VOLUME, BASS, TREBLE, CLOCK, ALARM, PRESET buttons.

Remote: POWER, CD controls (PLAY, PAUSE, STOP, SKIP), TUNING, PRESET, VOLUME, MUTE, BASS, TREBLE, SLEEP, ALARM.

Basic Functions: Power on/off, volume adjustment, source selection (CD/AUX/TUNER). Tone Controls: Adjust bass and treble independently. Clock/Alarm: Set time, dual alarms with CD or radio source. Radio: Manual tuning, preset selection, auto-scan. CD: Play, pause, stop, skip, repeat, random play.

Connecting Devices

Auxiliary Input: Connect MP3 players, smartphones, or other audio sources.

  1. Turn off system before connecting devices.
  2. Connect 3.5mm cable from device to AUX IN jack on rear panel.
  3. Select AUX source using SOURCE button on remote or front panel.
  4. Adjust volume on both system and connected device.

Tip: For best sound quality, use high-quality audio cables.

Playing CDs

Supports audio CDs, CD-R, and CD-RW discs.

  1. Insert disc: Press OPEN/CLOSE, place CD label-side up in tray.
  2. Play: Press PLAY; system automatically starts playback.
  3. Skip tracks: Press NEXT or PREVIOUS to skip forward/back.
  4. Pause: Press PAUSE to temporarily stop playback.
  5. Stop: Press STOP; press again to return to beginning.
  6. Repeat: Press REPEAT to repeat current track or entire CD.
  7. Random: Press RANDOM to play tracks in random order.
  8. Eject: Press OPEN/CLOSE to remove disc.

WARNING! Do not touch laser lens; keep discs clean and free of scratches.

Radio Operation

AM/FM tuner with 30 presets (15 AM, 15 FM).

  1. Select band: Press BAND to choose AM or FM.
  2. Tune manually: Use TUNE UP/DOWN buttons.
  3. Auto-scan: Press and hold TUNE to scan for stations.
  4. Set presets: Tune to station, press and hold preset button (1-15).
  5. Recall presets: Press preset number directly.
  6. FM stereo: Automatic stereo/mono switching.

Note: For better FM reception, fully extend wire antenna and position properly.

Care & Cleaning

Unplug before cleaning. Use soft, dry cloth for exterior. Use CD lens cleaner for optical pickup.

CAUTION! Do not use solvents, abrasives, or spray cleaners. Avoid moisture inside unit.

Regulatory Information

FCC Part 15: Class B digital device compliant. This device complies with Part 15 of FCC Rules. Copyright © Bose Corporation. All rights reserved. Bose and Acoustic Wave are registered trademarks of Bose Corporation. For support, visit www.bose.com or contact 1-800-999-2673.

Troubleshooting

SymptomPossible CauseCorrective Action
No powerPower cord not connectedCheck power connection; ensure outlet is working.
No soundVolume low/mutedIncrease volume; check MUTE status.
CD won't playDisc dirty/wrong formatClean disc; ensure it's an audio CD.
Poor radio receptionAntenna not connectedCheck antenna connections; reposition antennas.
Remote not workingBatteries/obstructionsReplace batteries; ensure clear path to sensor.
Distorted soundSource volume too highReduce volume on connected device.
Clock resetsPower interruptionReset time after power restoration.

Reset: Unplug for 2 minutes, then reconnect to reset system.

Service: 1-800-999-2673; www.bose.com

Bose Acoustic Wave 2 Manual © - All Rights Reserved 2025