Bose Acoustic Wave 1 Manual

The Bose Acoustic Wave 1 is a premium tabletop music system featuring advanced waveguide speaker technology, a built-in CD player, AM/FM tuner, and auxiliary input. It delivers room-filling sound from a compact unit with simple controls, remote operation, and preset station memory. Below are key sections for safety, features, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Operation 4. Specifications 5. Controls and Functions 6. Connecting External Devices 7. Playing CDs & Media 8. Radio Operation 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Acoustic waveguide speaker enclosure, CD player, AM/FM tuner, Remote Control, Auxiliary input, Headphone jack, Power cord.

FeatureDescription
Acoustic WaveguideProprietary technology for full, natural sound from compact enclosure
CD PlayerPlays audio CDs; supports track programming and repeat
AM/FM TunerDigital tuner with 6 preset stations (3 AM, 3 FM)
Auxiliary Input3.5mm jack for connecting external audio sources
Headphone JackFor private listening (disables internal speakers)
Remote ControlFull-function remote for all operations
POWERTurns system on/off
VOLUMERotary knob for adjusting sound level
SOURCESelects between CD, Tuner, and Aux input
PRESETRecalls stored radio stations

Installation & Setup

Unpack and inspect contents. Place on stable, level surface.

  1. Positioning: Place unit on table or shelf away from heat sources and direct sunlight.
  2. Connect power: Plug power cord into AC outlet (120V, 60Hz).
  3. Connect antenna: Attach included AM loop antenna and FM wire antenna.
  4. Connect external devices: Use auxiliary input for MP3 players, smartphones, etc.

WARNING! Do not place unit on soft surfaces (beds, sofas) that may block vents. Ensure adequate ventilation.

First-Time Operation

Power on system; follow initial setup steps.

  1. Set source: Press SOURCE button to select desired input (CD, Tuner, Aux).
  2. Set radio presets: Tune to desired station, press and hold PRESET button to store.
  3. Adjust tone: Use BASS and TREBLE controls to customize sound.
  4. Remote setup: Insert batteries (2 AAA), point at front panel sensor.

CAUTION! Handle CD player gently; do not force discs. Keep magnets away from unit.

Specifications

Controls and Functions

Front Panel: POWER, VOLUME knob, SOURCE, TUNING, PRESET, CD controls (PLAY/PAUSE, STOP, SKIP).

Remote: POWER, Numeric buttons (1-6 for presets), CD controls, VOLUME, MUTE, SOURCE, TUNING.

CD Functions: PLAY, PAUSE, STOP, SKIP (forward/back), REPEAT (track/all), PROGRAM (up to 20 tracks). Tuner Functions: Manual/Auto tuning, PRESET store/recall, BASS/TREBLE adjustment. System: Auto-off timer (sleep function), display brightness.

Connecting External Devices

Auxiliary Input: 3.5mm stereo jack for external audio sources.

  1. Turn off system before connecting devices.
  2. Connect device: Use 3.5mm audio cable from device's headphone/line output to AUX IN.
  3. Select source: Press SOURCE until "AUX" appears on display.
  4. Adjust volume: Start with low volume on both device and system.

Tip: For best sound quality, use devices with line-level output rather than headphone output when possible.

Playing CDs & Media

Supports standard audio CDs (CD-DA format).

  1. Insert disc: Press OPEN/CLOSE, place CD label-side up in tray.
  2. Play: Press PLAY; display shows track number and elapsed time.
  3. Skip tracks: Press SKIP forward/backward to navigate.
  4. Pause: Press PAUSE to temporarily stop playback.
  5. Stop: Press STOP; press again to return to track 1.
  6. Repeat: Press REPEAT for track or entire disc repeat.
  7. Program: Press PROGRAM to create custom play sequence.
  8. Random play: Press SHUFFLE for random track order.

WARNING! Do not use damaged or irregular-shaped CDs. Keep discs clean and free of scratches.

Radio Operation

AM/FM tuning with preset memory.

  1. Select tuner: Press SOURCE until "TUNER" appears.
  2. Select band: Press BAND to toggle between AM and FM.
  3. Tune stations: Use TUNING buttons or rotary knob; for auto-scan, press and hold.
  4. Store presets: Tune to station, press and hold PRESET (1-6) for 2 seconds.
  5. Recall presets: Press corresponding PRESET button (1-6).

Note: For better FM reception, extend wire antenna fully and position vertically. For AM, rotate loop antenna for best signal.

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth for exterior. For stubborn stains, dampen cloth slightly with water.

CAUTION! Never use solvents, abrasives, or aerosol sprays. Do not allow liquids to enter vents or controls. Clean CD lens only with approved CD lens cleaner.

Regulatory Information

FCC Compliance: This device complies with Part 15 of FCC Rules. Operation is subject to interference that may cause undesired operation. Copyright © Bose Corporation. All rights reserved. Acoustic Wave is a registered trademark of Bose Corporation. For support, visit www.bose.com or contact Bose Customer Service at 1-800-999-2673.

Troubleshooting

SymptomPossible CauseCorrective Action
No powerPower cord/outletCheck power connection; try different outlet; ensure unit is switched on.
No soundVolume/mute/sourceCheck volume setting; ensure MUTE is off; verify correct source selected.
CD won't playDisc/dirty lensEnsure CD is clean, undamaged, label-side up; try different CD; clean lens with approved cleaner.
Poor radio receptionAntenna/positionExtend FM antenna fully; reposition AM loop; move unit away from interference sources.
Remote not workingBatteries/obstructionReplace batteries; point remote at front panel sensor; remove obstacles.
Distorted soundSource/connectionsCheck audio source quality; ensure cables are securely connected; reduce volume.

Reset: Unplug unit for 2 minutes, then reconnect to reset system.

Service: 1-800-999-2673; www.bose.com/support

Bose Acoustic Wave 1 Manual © - All Rights Reserved 2025