Bose 360P Manual

The Bose 360P is a high-performance portable speaker system designed for immersive 360-degree sound, featuring Bluetooth connectivity, built-in rechargeable battery, voice assistant support, water-resistant design (IPX4), and intuitive touch controls. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Package Contents 3. Getting Started 4. Specifications 5. Controls and Indicators 6. Bluetooth Pairing 7. Using Voice Assistant 8. Charging the Battery 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 360-degree sound driver array, rechargeable lithium-ion battery, Bluetooth 5.0, touch-sensitive control panel, built-in microphone, USB-C charging port.

FeatureDescription
360-Degree SoundOmnidirectional audio projection for consistent sound anywhere in the room
Bluetooth 5.0Wireless audio streaming with extended range and stable connection
Voice AssistantBuilt-in support for Google Assistant and Siri (voice activation)
IPX4 Water ResistanceSplash-resistant design for indoor/outdoor use
Rechargeable BatteryUp to 12 hours of playback on a full charge
Touch ControlsVolume, playback, and call management via touch panel
Multi-Device PairingRemember up to 8 devices; connect to 2 simultaneously
Party ModePair multiple Bose 360P speakers for expanded sound
Auxiliary Input3.5mm audio jack for wired connection
USB-C PortFor charging and firmware updates

Package Contents

Unpack and verify all items are present.

  1. Bose 360P Speaker (1 unit)
  2. USB-C Charging Cable (1.5 meters)
  3. Quick Start Guide
  4. Safety and Warranty Information

NOTE: If any item is missing or damaged, contact Bose Customer Support immediately.

Getting Started

Power on the speaker and prepare for first use.

  1. Charge the speaker: Connect USB-C cable to power adapter (not included) and speaker.
  2. Power on: Press and hold power button until LED indicator lights blue.
  3. Initial pairing: Enable Bluetooth on your device, select "Bose 360P" from list.
  4. Placement: For best sound, place on flat surface away from walls and obstructions.

CAUTION! Do not expose to extreme temperatures or direct sunlight for extended periods.

Specifications

Controls and Indicators

Top panel features touch-sensitive controls and LED status indicator.

Touch Controls: Tap for play/pause; swipe left/right for previous/next track; swipe up/down for volume.

Buttons: Power (press and hold to turn on/off); Bluetooth (press to enter pairing mode); Voice Assistant (press to activate).

LED Indicators: Solid blue (power on/connected); flashing blue (pairing mode); solid red (charging); solid green (fully charged); flashing red (low battery/error).

Bluetooth Pairing

Connect to smartphones, tablets, or computers wirelessly.

  1. Turn on speaker (LED flashes blue).
  2. On your device, enable Bluetooth and scan for devices.
  3. Select "Bose 360P" from the list.
  4. Confirm pairing if prompted (no PIN required).
  5. LED turns solid blue when connected.

Tip: To pair additional devices, press Bluetooth button to enter pairing mode again.

Using Voice Assistant

Works with Google Assistant and Siri (iOS).

  1. Ensure speaker is connected via Bluetooth to your smartphone.
  2. Press and hold Voice Assistant button on speaker.
  3. Speak your command after the tone.
  4. Release button to send command.

NOTE: Voice assistant functionality requires compatible smartphone with assistant enabled.

Charging the Battery

Use included USB-C cable and a 5V/2A (or higher) power adapter.

  1. Connect USB-C cable to speaker and power adapter.
  2. Plug adapter into wall outlet.
  3. LED turns red while charging, green when fully charged.
  4. Disconnect cable after charging complete.

WARNING! Use only certified charging accessories to avoid damage. Do not charge near water.

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth; avoid liquids and abrasive cleaners.

CAUTION! Do not submerge in water (IPX4 protects against splashes only). Store in dry, cool place when not in use.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © 2025 Bose Corporation; all trademarks property of Bose Corporation. For support, visit www.bose.com/support or contact 1-800-999-2673.

Troubleshooting

SymptomPossible CauseCorrective Action
Speaker won't turn onBattery depletedCharge for at least 30 minutes; try different power adapter/cable.
Bluetooth connection failsOut of range/interferenceMove devices closer (within 30 ft); turn off other Bluetooth devices.
No sound from speakerVolume low/not connectedIncrease volume on speaker and source device; re-pair Bluetooth.
Voice assistant not workingSmartphone settingsEnable voice assistant on smartphone; check microphone permissions.
Short battery lifeHigh volume/old batteryReduce volume; allow full discharge/charge cycle; replace battery if needed.

Reset: Press and hold Power + Bluetooth buttons for 10 seconds to factory reset.

Service: 1-800-999-2673; www.bose.com/support

Bose 360P Manual © - All Rights Reserved 2025