Bose 3-2-1 Series 1 Manual

The Bose 3-2-1 Series 1 is a home entertainment system designed to deliver high-quality audio from DVDs, CDs, and other media sources. It features a media center, two direct/reflecting cube speakers, an Acoustimass module, and a universal remote control. The system supports Dolby Digital and DTS decoding, includes AM/FM tuner presets, and offers various setup and sound customization options. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Media Center, Two Direct/Reflecting Cube Speakers, Acoustimass Module, Universal Remote Control, Antenna Inputs, Audio/Video Inputs and Outputs.

Installation

Unpack and inspect all components. Place media center and speakers in desired locations.

1. Connect speakers: Attach cube speakers to media center using provided cables.
2. Connect Acoustimass module: Use included cable to connect to media center.
3. Connect TV: Use composite or S-Video cable from media center VIDEO OUT to TV input.
4. Connect antenna: Attach AM loop and FM wire antennas to respective terminals.
5. Plug into AC power.

WARNING! Ensure proper ventilation around media center. Do not place speakers too close to walls if not recommended.

First-Time Setup

Power on system; follow on-screen prompts if connected to TV.

1. Set language: In system menu, select preferred language (default ENGLISH).
2. Tune radio: Use auto-tune or manual tune to set AM/FM presets.
3. Configure remote: Program remote to control TV and other devices.
4. Adjust sound: Use BASS control and system settings for desired audio profile.

CAUTION! Handle cube speakers with care; avoid pulling on cables during installation.

Specifications

• System Type: 3-2-1 DVD home entertainment system.
• Audio Decoding: Dolby Digital, DTS.
• Speakers:Two cube speakers, one Acoustimass module. Remote ControlControls system and compatible TV, cable box, etc. Audio InputsFor connecting external audio sources (e.g., MP3 player) Video OutputsComposite and S-Video outputs for TV connection Dolby Digital/DTSDecoding for surround sound from DVDs AM/FM TunerPreset memory for radio stations Sleep TimerAutomatically turns off system after set time Bass ControlAdjusts low-frequency output

  Installation

  Unpack and inspect all components. Place media center and speakers in desired locations.

  1. Connect speakers: Attach cube speakers to media center using provided cables.
  2. Connect Acoustimass module: Use included cable to connect to media center.
  3. Connect TV: Use composite or S-Video cable from media center VIDEO OUT to TV input.
  4. Connect antenna: Attach AM loop and FM wire antennas to respective terminals.
  5. Plug into AC power.

  WARNING! Ensure proper ventilation around media center. Do not place speakers too close to walls if not recommended.

  First-Time Setup

  Power on system; follow on-screen prompts if connected to TV.

  1. Set language: In system menu, select preferred language (default ENGLISH).
  2. Tune radio: Use auto-tune or manual tune to set AM/FM presets.
  3. Configure remote: Program remote to control TV and other devices.
  4. Adjust sound: Use BASS control and system settings for desired audio profile.

  CAUTION! Handle cube speakers with care; avoid pulling on cables during installation.

  Specifications

  • System Type: 3-2-1 DVD home entertainment system.
  • Audio Decoding: Dolby Digital, DTS.
  • Speakers: Two cube speakers, one Acoustimass module.
  • Power Output: Not specified; refer to product label.
  • Inputs/Outputs: Audio inputs, video outputs, antenna terminals.
  • Supported Media: DVD-Video, DVD-R/RW, CD, CD-R/RW, MP3 CDs.
  • Remote: Universal remote with learning capability.
  • Power Source: 120V AC, 60Hz.
  • Dimensions: Varies per component; see packaging.

  Controls and Settings

  Access system menu via remote or front panel buttons. Front Panel: POWER, OPEN/CLOSE, VOLUME, SOURCE SELECT.

  Remote: POWER, Numeric buttons, OPEN/CLOSE, SOURCE, VOLUME, MUTE, MENU, NAVIGATION arrows, ENTER, BASS, SLEEP.

  System Menu: Language, Speaker Setup, Audio Options (Dolby Digital, DTS), Radio Presets, Remote Setup, Sleep Timer. Audio: BASS control, TREBLE (if available), dynamic range compression. Video: Output format (Composite, S-Video).

  Connecting Devices

  TV: Use VIDEO OUT (composite or S-Video). External Audio: Use AUDIO IN jacks. Antenna: AM loop and FM wire.

  1. Turn off system and devices before connecting.
  2. Match cables to correct ports (e.g., yellow for composite video).
  3. Select source via SOURCE button (DVD, AUX, TUNER).

  Tip: Use high-quality cables for best audio/video performance.

  Playing Media

  Supports DVD-Video, CD, MP3 CDs.

  1. Insert disc: Press OPEN/CLOSE, load media.
  2. Play: Press PLAY; navigate with remote arrows or numeric buttons.
  3. Stop: Press STOP; eject with OPEN/CLOSE.
  4. Skip: PREV/NEXT for tracks/chapters.
  5. Repeat: Press REPEAT for track/chapter/disc repeat modes.
  6. Sound Modes: Use MOVIE, MUSIC, etc., for optimized audio.
  7. Radio: Press TUNER, select AM/FM, tune to station, store presets.

  WARNING! Do not use damaged or irregularly shaped discs. Keep discs clean.

  System Features

  Universal Remote: Program to control TV, cable box, etc. (see remote setup in menu). Sleep Timer: Set in menu (15-90 minutes). Speaker Setup: Configure for room size if option available. Dynamic Range Compression: Reduces loud sound variations (useful for night listening).

  Care & Cleaning

  Unplug system before cleaning. Wipe media center and speakers with dry, soft cloth. Clean discs with soft cloth from center outward.

  CAUTION! Do not use liquids or abrasive cleaners on speakers or media center.

  Regulatory Information

  FCC Compliance: Class B digital device; complies with part 15 rules. Copyright © Bose Corporation. Trademarks used under license. For support, visit www.bose.com or contact Bose Customer Service.

  Troubleshooting

  Symptom	Possible Cause	Corrective Action
  No power	Power cord not connected	Ensure power cord is securely plugged into outlet and media center.
  No sound from speakers	Speaker cables loose	Check connections at media center and speakers; ensure cables are firmly attached.
  Remote not working	Batteries/obstructions	Replace batteries; ensure clear path to media center IR sensor.
  Disc not playing	Disc dirty/unsupported	Clean disc; ensure it is a supported format (DVD, CD, MP3 CD).
  Poor radio reception	Antenna placement	Reposition AM loop and FM wire antennas; ensure connections are tight.
  No video on TV	Incorrect input selected	Ensure TV is set to correct input (e.g., VIDEO 1); check video cable connections.

  Reset: Unplug media center for 60 seconds, then reconnect power.

  Service: Contact Bose Customer Support or authorized service center.

  Bose 3-2-1 Series 1 Manual © - All Rights Reserved 2025